手机版
你好,游客 登录 注册
背景:
阅读新闻

在CentOS 6.3上搭建FTP服务器vsftpd

[日期:2016-07-19] 来源:Linux社区  作者:Linux [字体: ]

vsftpd是Linux平台下非常著名的一个ftp软件。vsftpd是 very secure ftp daemon 的缩写。

一、安装vsftpd
先检查系统中是否安装了vsftpd
[root@localhost Packages]# rpm -qa | grep vsftpd
[root@localhost Packages]#

如果没安装,就继续下面安装。

CentOS 的第一张安装光盘插入光驱,在光盘的Packages目录下找到vsftpd安装包,然后安装。
[root@localhost Packages]# ls *vsftpd*
vsftpd-2.2.2-11.el6.x86_64.rpm
[root@localhost Packages]# rpm -ivh vsftpd-2.2.2-11.el6.x86_64.rpm
Preparing...                ########################################### [100%]
  1:vsftpd                ########################################### [100%]

二、启动vsftpd服务

[root@localhost Packages]# service vsftpd status
vsftpd is stopped
[root@localhost Packages]# service vsftpd start
Starting vsftpd for vsftpd:                                [  OK  ]

vsftpd的匿名用户的默认主目录是/var/ftp,vsftpd 的配置文件位于/etc/vsftpd目录下。

三、测试在客户端访问vsftpd服务器的/var/ftp目录。

在Windows系统的资源管理器的“地址”栏中输入“ftp://Centos系统的IP地址”,回车即显示当前/var/ftp目录下的内容啦。

四、vsftpd 匿名用户的上传和下载权限的配置

很多朋友配置vsftpd时不能使用匿名用户上传和下载(创建目录或删除、重命名文件夹),本文主要解决vsftpd的匿名用户权限配制问题。

配置要注意三部分,请一一仔细对照:

1. vsftpd.conf文件的配置(vi /etc/vsftpd/vsftpd.conf)
#允许匿名用户登录FTP(如果不允许匿名访问就设置为NO,后面有添加FTP用户的详细介绍)
anonymous_enable=YES
#打开匿名用户的上传权限
anon_upload_enable=YES
#打开匿名用户创建目录的权限
anon_mkdir_write_enable=YES

#允许匿名用户具有建立目录和上传之外的权限,如重命名、删除等。

anon_other_write_enable=YES

2. ftp目录的权限设置
ftp的根目录为/var/ftp,为了安全,这个目录默认不允许设置为777权限,否则ftp将无法访问。/var/ftp/pub是匿名用户的默认访问目录,即vsftpd.conf文件中没有anon_root设置时的默认目录。不知为何,如果用anon_root指定其它目录后,在终端用ftp命令匿名登录就失败,并提示:500 OOPS: vsftpd: refusing to run with writable anonymous root 错误,目前还没有找到具体原因和解决办法。

一般至此,便实现vsftpd匿名用户的上传下载了,如果还不行,就按下面说明配置一下selinux。

3. selinux的配置
SELinux(Security-Enhanced Linux) 是美国国家安全局(NAS)对于强制访问控制的实现,是 Linux上最杰出的新安全子系统。NSA是在Linux社区的帮助下开发了一种访问控制体系,在这种访问控制体系的限制下,进程只能访问那些在他的任务中所需要文件。SELinux 默认安装在 FedoraRed Hat Enterprise Linux 上,也可以作为其他发行版上容易安装的包得到。
  
最简单的办法是关闭selinux
方法1:修改/etc/selinux/config文件中的SELINUX="" 为 disabled ,然后重启。(验证通过)
方法2:用命令setenforce 0,无需重启。(setenforce的格式:setenforce [ Enforcing | Permissive | 1 | 0 ]) (转述的,没试过)
方法3:在lilo或者grub的启动参数中增加:selinux=0,也可以关闭selinux。(转述的,没试过)
  
使用getenforce查看当前selinux是否正在运行。
  
如果不关闭selinux,就要设置selinux的ftp权限。(转述的,没试过)
(1)使用getsebool -a | grep ftp查看ftp相关设置状态,我们要将allow_ftpd_anon_write设为on。
(2)使用setsebool -P 进行设置。例:setsebool -P allow_ftpd_anon_write=on。
   或使用togglesebool进行bool值取反,例如togglesebool allow_ftpd_anon_write。
(3)修改selinux安全上下文,先介绍两个命令:
   命令1:ls -Z  ps -Z  id -Z  # 分别可以看到文件,进程和用户的SELinux属性
   命令2:#chcon 改变SELinux安全上下文
   chcon -u  对象
       -r
       -t
       -R 递归
       --reference 源文件 目标文件          # 复制安全上下文
   使用方法:
    步骤1:ls -Zd /var/ftp/upload/ 通常会看到:
     drwxr-xr-x ftp root system_u:object_r:public_content_t /var/ftp/upload/
    步骤2、chcon -R -t public_content_rw_t /var/ftp/upload/
    步骤3、ls -Zd /var/ftp/upload/ 如果看到如下信息就OK了:
     drwxr-xr-x ftp root system_u:object_r:public_content_rw_t /var/ftp/upload/
  最后还是重启下selinux和vsftpd吧,不重启其实也没关系。重新登录到ftp上,应该就能解决问题了。
  另,selinux的图形界面 可由system-config-selinux命令进入。

--------------------------------------分割线 --------------------------------------

FTP服务器的简介就不介绍了,相信大家都知道是什么东东。不了解的就google吧!这里用到的FTP服务器软件是非常著名的vsftpd.

1.安装vsFTPd软件
源码安装就不说了,可以google,因为在线安装很方便的.
Fedora下安装很简单 yum install vsftpd 即可.

2.启动/重启/关闭vsftpd服务器
[root@localhost ftp]# /sbin/service vsftpd restart
Shutting down vsftpd:                                      [  OK  ]
Starting vsftpd for vsftpd:                                [  OK  ]
OK表示重启成功了.
启动和关闭分别把restart改为start/stop即可.
如果是源码安装的,到安装文件夹下找到start.sh和shutdown.sh文件,执行它们就可以了.

3.与vsftpd服务器有关的文件和文件夹
vsftpd服务器的配置文件的是: /etc/vsftpd/vsftpd.conf

vsftpd服务器的根目录,即FTP服务器的主目录:
[root@localhost ftp]# more /etc/passwd|grep ftp
ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin
这样你就能看到FTP的服务器的目录在/var/ftp处
如果你想修改服务器目录的路径,那么你只要修改/var/ftp到别处就行了

4.添加FTP用户
有的FTP服务器需要用户名和密码才能登录,就是因为设置了FTP用户和权限.
FTP用户一般是不能登录系统的,只能进入FTP服务器自己的目录中,这是为了安全.这样的用户就叫做虚拟用户了.实际上并不是真正的虚拟用户,只是不能登录SHELL了而已,没能力登录系统.

/usr/sbin/adduser -d /opt/test_ftp -g ftp -s /sbin/nologin test
这个命令的意思是:
使用命令(adduser)添加test用户,不能登录系统(-s /sbin/nologin),自己的文件夹在(-d /opt/test_ftp)),属于组ftp(-g ftp)
然后你需要为它设置密码:passwd test
这样就添加了一个FTP用户了.下面的示例可以帮助你进入FTP服务器了.

[root@localhost ftp]# ftp
ftp> open 192.168.0.33
Connected to 192.168.0.33 (192.168.0.33).
220 (vsFTPd 2.0.5)
Name (192.168.0.33:gxl): test
331 Please specify the password.
Password:
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> quit
221 Goodbye.

在windows中,只要在浏览器中输入 ftp://192.168.0.33 进入FTP服务器,然后 右键 登录,输入用户名和密码就可以登录自己的目录了.
当然你要保证自己能读写自己的目录,就要在配置文件vsftpd.conf里设置一下就可以读写了.
local_enable=yes
write_enable=yes
local_umask=022

5.匿名上传下载
修改配置文件即可vsftpd.conf,确定有以下几行,没有自己添加进去就可以了.
anonymous_enable=yes
anon_upload_enable=yes
anon_mkdir_write_enable=yes
anon_umask=022

然后你可以新建一个文件夹,修改它的权限为完全开放,任何用户就可以登录这个文件夹,并上传下载文件:
mkdir /var/ftp/guest
chmod 777 /var/ftp/guest

6.定制进入FTP服务器的欢迎信息
在vsftpd.conf文件中设置:
dirmessage_enable=yes
然后进入用户目录建立一个.message文件,输入欢迎信息即可(我这里写入的是Welcome to gxlinux's FTP!):
[root@localhost test_ftp]# ftp 192.168.0.33
Connected to 192.168.0.33 (192.168.0.33).
220 (vsFTPd 2.0.5)
Name (192.168.0.33:gxl): test
331 Please specify the password.
Password:
230-Welcome to gxlinux's FTP!
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.

7.实现虚拟路径
将某个目录挂载到FTP服务器下供用户使用,这就叫做虚拟路径.
比如将gxl用户的目录挂载到FTP服务器中,供FTP服务器的用户使用,使用如下命令即可:
[root@localhost opt]# mount --bind /home/gxl /var/ftp/pub #使用挂载命令
[root@localhost opt]# ls /var/ftp/pub
LumaQQ  Screenshot.png 桌面

8.打开vsFTPd的日志功能
添加下面一行到vsftpd.conf文件中,一般情况下该文件中有这一行,只要把前面的注释符号#去掉即可,没有的话就添加,或者修改:
xferlog_file=/var/log/vsftpd.log

9.限制链接数,以及每个IP最大的链接数
修改配置文件中,例如vsftp最大支持链接数100个,每个IP能支持5个链接:
max_client=100
max_per=5

10.限制传输速度
修改配置文件中,例如让匿名用户和vsftd上的用户(即虚拟用户)都以80KB=1024*80=81920的速度下载
anon_max_rate=81920
local_max_rate=81920

11.将用户(一般指虚拟用户)限制在自家目录
修改配置文件中,这样用户就只能访问自己家的目录了:
chroot_local_user=yes
如果只想某些用户仅能访问自己的目录,其它用户不做这个限制,那么就需要在chroot_list文件(此文件一般是在/etc/vsftpd/中)中添加此用户.
编辑此文件,比如将test用户添加到此文件中,那么将其写入即可.一般的话,一个用户占一行.
[root@localhost vsftpd]# cat chroot_list
test

12.绑定某个IP到vsFTPd
有时候要限制某些IP访问服务器,只允许某些IP访问,例如只允许192.168.0.33访问这个FTP,同样修改配置文件:
listen_address=192.168.0.33

 

 

=======================================================================


自己配置的 vsftpd.conf (主动模式和被动模式都支持(已验证),还可以输出日志文件)

 


[root@localhost vsftpd]# pwd
/etc/vsftpd
[root@localhost vsftpd]# cat vsftpd.conf
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
# 指定日志目录(还没研究这个日志和后面的日志有何区别,呵呵):
xferlog_file=/ftptest/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd with two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES

pam_service_name=vsftpd
userlist_enable=YES
tcp_wrappers=YES
#
# other...

anon_other_write_enable=YES
#anon_root=/var/ftp/pub
dual_log_enable=YES
# 指定日志目录:
vsftpd_log_file=/ftptest/vsftpd.log   
# 开启主动模式: 
port_enable=YES
# 开启被动模式(默认开启被动模式,想关闭被动模式需要设置NO): 
pasv_enable=YES
# 指定被动模式端口范围: 
pasv_min_port=50000
pasv_max_port=60000

[root@localhost vsftpd]#

玩转vsftpd服务器的四大高级配置:http://www.linuxidc.com/Linux/2013-09/90565.htm

vsFTPd配置教程:http://www.linuxidc.com/Linux/2013-09/90562.htm

Ubuntu实用简单的FTP架设 http://www.linuxidc.com/Linux/2012-02/55346.htm

Ubuntu 上架设FTP服务器和Apache服务器 http://www.linuxidc.com/Linux/2011-04/35295.htm

Ubuntu 13.04 安装 LAMP\vsftpd\Webmin\phpMyAdmin 服务及设置 http://www.linuxidc.com/Linux/2013-06/86250.htm

RHEL6平台下SeLinux和vsftpd的匿名上传的简单案例 http://www.linuxidc.com/Linux/2013-04/82300.htm

Linux系统vsftpd源码安装 http://www.linuxidc.com/Linux/2013-03/81475.htm

openSUSE 13.2/13.1 下安装配置 FTP服务器 vsftpd  http://www.linuxidc.com/Linux/2014-12/110070.htm

本文永久更新链接地址http://www.linuxidc.com/Linux/2016-07/133315.htm

linux
相关资讯       vsftpd  CentOS搭建ftp服务器 
本文评论   查看全部评论 (0)
表情: 表情 姓名: 字数

       

评论声明
  • 尊重网上道德,遵守中华人民共和国的各项有关法律法规
  • 承担一切因您的行为而直接或间接导致的民事或刑事法律责任
  • 本站管理人员有权保留或删除其管辖留言中的任意内容
  • 本站有权在网站内转载或引用您的评论
  • 参与本评论即表明您已经阅读并接受上述条款