你好,游客 登录 注册 搜索
背景:
阅读新闻

Linux下命令行安装WebLogic 10.3.6

[日期:2016-12-08] 来源:Linux社区  作者:Linux [字体: ]

一、安装前准备工作:

1、创建用户useradd weblogic;创建用户成功linux系统会自动创建一个和用户名相同的分组,并将该用户分到改组中。并会在/home路径下创建一个和用户名相同的路径,比如我们创建的weblogic。

注:当然,你也可以通过groupadd -g GID groupname(GID代表创建组的ID,一般大于500),然后useradd –d userhome –g GID username(userhome 代表用户的主目录,GID 为前一步创建的组ID)创建用户并将用户分到相应的组里面。

2、卸载掉linux系统自带的jdk,安装我们自己的jdk,建议和开发过程中用到的jdk版本一致。

注:jdk的卸载和安装参见:http://www.linuxidc.com/Linux/2016-12/138043.htm

二、开始安装:
a.?创建weblogic用户组.?

useradd weblogic
passwd weblogic

更改jdk版本

2、进入安装目录
#cd /home
#cp jdk-7u76-linux-x64.rpm /usr/local
#cd /usr/local
给所有用户添加可执行的权限

#rpm -ivh jdk-7u76-linux-x64.rpm

设置环境变量

#vi /etc/profile

打开后,在文档最下方加上以下环境变量配置代码:

export JAVA_HOME=/usr/java/jdk1.6.0_45
export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar
export PATH=$JAVA_HOME/bin:$PATH

 

执行生效

#. /etc/profile

weblogic用户

export JAVA_HOME=/usr/java/jdk1.6.0_45

export JAVA_BIN=/usr/java/jdk1.6.0_45/bin

export PATH=$PATH:$JAVA_HOME/bin

export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar

export JAVA_HOME JAVA_BIN PATH CLASSPATH

注意:export PATH=$JAVA_HOME/bin:$PATH,注意将$PATH放到最后。以免造成新旧版本问题。
当你已经成功把jdk1.6.0_45 安装到 /usr/java,并且配置好了系统环境变量
执行 # java -version 时就是 显示jdk1.6.0_45,是因为你的linux系统有默认的jdk;执行
cp jdk-6u7-linux-i586.bin /usr
即将jdk复制到/usr目录下,然后进入/usr目录cd /usr

执行权限

chmod +x jdk-6u45-linux-x64.bin

执行安装命令

./jdk-6u45-linux-x64.bin

1、# cd /usr/bin

# ln -s -f /usr/java/jdk1.6.0_45/jre/bin/java

# ln -s -f /usr/java/jdk1.6.0_45/bin/javac

2、接着卸载jdk-1.7.0_76,再次重新安装。卸载方法:

先查看jdk-1.7.0_76包名

#rpm -qa | grep jdk


接着执行

#rpm -e jdk-1.7.0_76-fcs

卸载完后,再次重新安装jdk-7u76-linux-x64.rpm 。


1、进入安装路径:/home/weblogic

2、将安装文件wls1036_generic.jar放入安装目录

3、chmod a+x wls1036_generic.jar  赋予安装文件可执行的权限

4、执行安装命令:java -jar filename.jar -mode=console

注:如果安装文件是.bin格式的文件,安装命令为:./wls1036_generic.bin -mode=console;(你可以不加“-mode=console”的控制台文本模式,因为在你安装时无法启动图形安装界面时它会自动的进入文本控制台模式的)


5、控制台安装:

 

 

 

 

 

一、安装weblogic10.3.6 64位:

-bash-4.1$ java -jar wls1036_generic.jar
Unable to instantiate GUI, defaulting to console mode.无法实例化 GUI,默认进入控制台模式。
Extracting 0%....................................................................................................100%

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Welcome:
--------

This installer will guide you through the installation of WebLogic 10.3.6.0.
Type "Next" or enter to proceed to the next prompt.  If you want to change data entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".

 
Enter [Exit][Next]> 回车

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

    "Middleware Home" = [Enter new value or use default
"/bea/weblogic/Oracle/Middleware"]

 
Enter new Middleware Home OR [Exit][Previous][Next]> /bea/weblogic/

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

    "Middleware Home" = [/bea/weblogic]

Use above value or select another option:
    1 - Enter new Middleware Home
    2 - Change to default [/bea/weblogic/Oracle/Middleware]

 
Enter option number to select OR [Exit][Previous][Next]> 1

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

    "Middleware Home" = [/bea/weblogic]

 
Enter new Middleware Home OR [Exit][Previous][Next]>

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

    Warning

/bea/weblogic directory is not empty. Proceed with installation?

 
Enter [Exit][Previous][Next]>

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

  1|Email:[]
  2|Support Password:[]
  3|Receive Security Update:[Yes]


Enter index number to select OR [Exit][Previous][Next]> 3

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

    "Receive Security Update:" = [Enter new value or use default "Yes"]

 

Enter [Yes][No]? no

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

    "Receive Security Update:" = [Enter new value or use default "Yes"]

 

Enter [Yes][No]? yes

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

  1|Email:[]
  2|Support Password:[]
  3|Receive Security Update:[No]

 

Enter index number to select OR [Exit][Previous][Next]>

 
<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

  1|Email:[]
  2|Support Password:[]
  3|Receive Security Update:[No]

 

Enter index number to select OR [Exit][Previous][Next]>

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Install Type:
--------------------

Select the type of installation you wish to perform.

 ->1|Typical
    |  Install the following product(s) and component(s):
    | - WebLogic Server
    | - Oracle Coherence

  2|Custom
    |  Choose software products and components to install and perform optional
    |configuration.

 

Enter index number to select OR [Exit][Previous][Next]> 2

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Products and Components:
-------------------------------

    Release 10.3.6.0
    |_____WebLogic Server [1] x
    |    |_____Core Application Server [1.1] x
    |    |_____Administration Console [1.2] x
    |    |_____Configuration Wizard and Upgrade Framework [1.3] x
    |    |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
    |    |_____WebLogic SCA [1.5] x
    |    |_____WebLogic JDBC Drivers [1.6] x
    |    |_____Third Party JDBC Drivers [1.7] x
    |    |_____WebLogic Server Clients [1.8] x
    |    |_____WebLogic Web Server Plugins [1.9] x
    |    |_____UDDI and Xquery Support [1.10] x
    |    |_____Server Examples [1.11]
    |    |_____Evaluation Database [1.12] x
    |_____Oracle Coherence [2] x
        |_____Coherence Product Files [2.1] x
        |_____Coherence Examples [2.2]

    *Estimated size of installation: 690.2 MB

 
Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]> 2

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Products and Components:
-------------------------------

    Release 10.3.6.0
    |_____WebLogic Server [1] x
    |    |_____Core Application Server [1.1] x
    |    |_____Administration Console [1.2] x
    |    |_____Configuration Wizard and Upgrade Framework [1.3] x
    |    |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
    |    |_____WebLogic SCA [1.5] x
    |    |_____WebLogic JDBC Drivers [1.6] x
    |    |_____Third Party JDBC Drivers [1.7] x
    |    |_____WebLogic Server Clients [1.8] x
    |    |_____WebLogic Web Server Plugins [1.9] x
    |    |_____UDDI and Xquery Support [1.10] x
    |    |_____Server Examples [1.11]
    |    |_____Evaluation Database [1.12] x
    |_____Oracle Coherence [2]
        |_____Coherence Product Files [2.1]
        |_____Coherence Examples [2.2]

    *Estimated size of installation: 678.7 MB

 
Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

JDK Selection (Any * indicates Oracle Supplied VM):
---------------------------------------------------

JDK(s) chosen will be installed.  Defaults will be used in script string-substitution if installed.

  1|Add Local Jdk
  2|/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64[x]

 

  *Estimated size of installation:  678.7 MB


Enter 1 to add or >= 2 to toggle selection  OR [Exit][Previous][Next]>

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Product Installation Directories:
----------------------------------------

Middleware Home Directory: [/bea/weblogic]

Product Installation Directories:


    "WebLogic Server" = [Enter new value or use default
"/bea/weblogic/wlserver_10.3"]

 
Enter new WebLogic Server OR [Exit][Previous][Next]>

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

The following Products and JDKs will be installed:
--------------------------------------------------

    WebLogic Platform 10.3.6.0
    |_____WebLogic Server
        |_____Core Application Server
        |_____Administration Console
        |_____Configuration Wizard and Upgrade Framework
        |_____Web 2.0 HTTP Pub-Sub Server
        |_____WebLogic SCA
        |_____WebLogic JDBC Drivers
        |_____Third Party JDBC Drivers
        |_____WebLogic Server Clients
        |_____WebLogic Web Server Plugins
        |_____UDDI and Xquery Support
        |_____Evaluation Database

    *Estimated size of installation: 678.8 MB

 
Enter [Exit][Previous][Next]>

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Installing files..

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]


Performing String Substitutions...

 
<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Configuring OCM...

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]


Creating Domains...

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Installation Complete


Congratulations! Installation is complete.


Press [Enter] to continue or type [Exit]>

 

 

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Clean up process in progress ...

二、配置domains

cd /home/weblogic/Oracle/Middleware/wlserver_10.3/common/bin
-bash-4.1$ ./config.sh
Unable to instantiate GUI, defaulting to console mode.


<------------------- Fusion Middleware Configuration Wizard ------------------>

Welcome:
--------

Choose between creating and extending a domain. Based on your selection,
the Configuration Wizard guides you through the steps to generate a new or
extend an existing domain.

 ->1|Create a new WebLogic domain
    |    Create a WebLogic domain in your projects directory.

  2|Extend an existing WebLogic domain
    |    Use this option to add new components to an existing domain and modify    |configuration settings.


Enter index number to select OR [Exit][Next]> 1


<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Domain Source:
---------------------

Select the source from which the domain will be created. You can create the
domain by selecting from the required components or by selecting from a
list of existing domain templates.

 ->1|Choose Weblogic Platform components
    |    You can choose the Weblogic component(s) that you want supported in
    |your domain.

  2|Choose custom template
    |    Choose this option if you want to use an existing  template. This
    |could be a custom created template using the Template Builder.


Enter index number to select OR [Exit][Previous][Next]> 1


<------------------- Fusion Middleware Configuration Wizard ------------------>

Application Template Selection:
-------------------------------

 
    Available Templates
    |_____Basic WebLogic Server Domain - 10.3.6.0 [wlserver_10.3]x
    |_____Basic WebLogic SIP Server Domain - 10.3.6.0 [wlserver_10.3] [2]
    |_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.6.0 [wlserver_10.3] [3]
    |_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.6.0 [wlserver_10.3] [4]


Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>


<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

    |  Name  |    Value    |
  _|________|_____________|
  1| *Name: | base_domain |


Enter value for "Name" OR [Exit][Previous][Next]> wlyxweb


<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

    |  Name  |  Value  |
  _|________|_________|
  1| *Name: | wlyxweb |

Use above value or select another option:
    1 - Modify "Name"
    2 - Discard Changes


Enter option number to select OR [Exit][Previous][Next]>


<------------------- Fusion Middleware Configuration Wizard ------------------>

Select the target domain directory for this domain:
---------------------------------------------------

    "Target Location" = [Enter new value or use default
"/bea/weblogic/user_projects/domains"]

Enter new Target Location OR [Exit][Previous][Next]> /wlyx/webapp/domains


<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

    |          Name          |                  Value                  |
  _|_________________________|_________________________________________|
  1|        *Name:          |                weblogic                |
  2|    *User password:    |                                        |
  3| *Confirm user password: |                                        |
  4|      Description:      | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"


Enter option number to select OR [Exit][Previous][Next]> 2


<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

    "*User password:" = []


Enter new *User password: OR [Exit][Reset][Accept]> welwlyx50


<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

    |          Name          |                  Value                  |
  _|_________________________|_________________________________________|
  1|        *Name:          |                weblogic                |
  2|    *User password:    |                *********                |
  3| *Confirm user password: |                                        |
  4|      Description:      | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 3


<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

    "*Confirm user password:" = []


Enter new *Confirm user password: OR [Exit][Reset][Accept]> welwlyx50


<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

    |          Name          |                  Value                  |
  _|_________________________|_________________________________________|
  1|        *Name:          |                weblogic                |
  2|    *User password:    |                *********                |
  3| *Confirm user password: |                *********                |
  4|      Description:      | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes


Enter option number to select OR [Exit][Previous][Next]>


<------------------- Fusion Middleware Configuration Wizard ------------------>

Domain Mode Configuration:
--------------------------

Enable Development or Production Mode for this domain.

 ->1|Development Mode

  2|Production Mode


Enter index number to select OR [Exit][Previous][Next]> 2


<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

 ->1|N/A SDK 1.6.0_24 @ /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64
  2|Other Java SDK


Enter index number to select OR [Exit][Previous][Next]> 2


<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

    "JVM Directory" = []


Enter new JVM Directory OR [Exit][Previous][Next]> /bea/jdk/jdk1.6.0_37


<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

    "JVM Directory" = [/bea/jdk/jdk1.6.0_37]


Enter new JVM Directory OR [Exit][Previous][Next]>


<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Optional Configuration:
------------------------------

  1|Administration Server [ ]
  2|Managed Servers, Clusters and Machines [ ]
  3|RDBMS Security Store [ ]


Enter index number to select OR [Exit][Previous][Next]> 1


<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Optional Configuration:
------------------------------

  1|Administration Server [x]
  2|Managed Servers, Clusters and Machines [ ]
  3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]>


<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.

    |      Name      |        Value        |
  _|__________________|_____________________|
  1|      *Name:      |    AdminServer    |
  2| *Listen address: | All Local Addresses |
  3|  Listen port:  |        7001        |
  4| SSL listen port: |        N/A        |
  5|  SSL enabled:  |        false        |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "Listen address"
    3 - Modify "Listen port"
    4 - Modify "SSL enabled"

Enter option number to select OR [Exit][Previous][Next]>


<------------------- Fusion Middleware Configuration Wizard ------------------>

Creating Domain...

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]


**** Domain Created Successfully! ****


四:weblogic的使用

1、启动服务时无需输入用户名和密码

进入到你新建的域中:cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer

然后在该文件夹下新建名为security的文件夹:mkdir security

在刚刚新建是文件夹中新建名为boot.properties文件:vi boot.properties

然后在该文件中输入:

username=weblogic

password=weblogc123

保存后退出。重启weblogic。此时你会发觉,weblogic再也不会提示要求你输入weblogic管理台的用户名和密码了。

重启后我们来到刚刚的新建的文件夹中查看新建的文件:
cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer/security

vi boot.properties发现它的内容已经变成下面这个样子了:

#Sun Aug 04 10:23:54 CST 2013

password={AES}KWRQeICbIyJLO3zh+v+/9JeJtCzpK9ge6j4pqf9sSqA\=

username={AES}ICJVfwErXU5MOQyVPzcvVpKBkK6gI6UFlwqkkEuVgBg\=

Weblogic把它给加密了,因此只有装Weblogic的那个人即System Admin才真正知道Weblogic控制台的登录信息,这样就很安全了。

2、启动weblogic服务

cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain

./startWeblogic.sh

nohup ./startWeblogic.sh &(nohup命令:如果你正在运行一个进程,而且你觉得在退出帐户时该进程还不会结束,那么可以使用nohup命令。
该命令可以在你退出帐户/关闭终端之后继续运行相应的进程。nohup就是不挂起的意思( no hang up))


找台服务器 启动浏览器 输入 http://10.85.31.242:7001/console

WebLogic 12c下配置节点管理器管理受管理服务器 http://www.linuxidc.com/Linux/2015-12/126788.htm

WebLogic重新设置管理员账号和口令 http://www.linuxidc.com/Linux/2015-08/121052.htm

CentOS 6.3安装配置Weblogic 10  http://www.linuxidc.com/Linux/2014-02/96918.htm

Oracle WebLogic 11g 安装部署文档 PDF http://www.linuxidc.com/Linux/2013-04/83658.htm

Linux部署Weblogic11g http://www.linuxidc.com/Linux/2013-01/77940.htm

Oracle基础教程之安装与配置Weblogic单实例 http://www.linuxidc.com/Linux/2012-02/54418.htm

Linux下Weblogic卸载 http://www.linuxidc.com/Linux/2012-01/51886.htm

Weblogic多机器集群的配置 http://www.linuxidc.com/Linux/2011-12/50577.htm

Weblogic的安装和配置 http://www.linuxidc.com/Linux/2011-12/49082.htm

更多Oracle相关信息见Oracle 专题页面 http://www.linuxidc.com/topicnews.aspx?tid=12

本文永久更新链接地址http://www.linuxidc.com/Linux/2016-12/138044.htm

linux
本文评论   查看全部评论 (0)
表情: 表情 姓名: 字数

       

评论声明
  • 尊重网上道德,遵守中华人民共和国的各项有关法律法规
  • 承担一切因您的行为而直接或间接导致的民事或刑事法律责任
  • 本站管理人员有权保留或删除其管辖留言中的任意内容
  • 本站有权在网站内转载或引用您的评论
  • 参与本评论即表明您已经阅读并接受上述条款