手机版
你好,游客 登录 注册
背景:
阅读新闻

网络监控器Nagios全攻略

[日期:2013-07-08] 来源:Linux社区  作者:Linux [字体: ]

六、配置Nagios

Nagios 主要用于监控一台或者多台本地主机及远程的各种信息,包括本机资源及对外的服务等。默认的Nagios 配置没有任何监控内容,仅是一些模板文件。若要让Nagios 提供服务,就必须修改配置文件,增加要监控的主机和服务,下面将详细介绍。

6.1 默认配置文件介绍

Nagios 安装完毕后,默认的配置文件在/usr/local/nagios/etc目录下。

29

每个文件或目录含义如下表所示:

文件名或目录名 用途
cgi.cfg 控制CGI访问的配置文件
nagios.cfg Nagios 主配置文件
resource.cfg 变量定义文件,又称为资源文件,在些文件中定义变量,以便由其他配置文件引用,如$USER1$
objects objects 是一个目录,在此目录下有很多配置文件模板,用于定义Nagios 对象
objects/commands.cfg 命令定义配置文件,其中定义的命令可以被其他配置文件引用
objects/contacts.cfg 定义联系人和联系人组的配置文件
objects/localhost.cfg 定义监控本地主机的配置文件
objects/printer.cfg 定义监控打印机的一个配置文件模板,默认没有启用此文件
objects/switch.cfg 定义监控路由器的一个配置文件模板,默认没有启用此文件
objects/templates.cfg 定义主机和服务的一个模板配置文件,可以在其他配置文件中引用
objects/timeperiods.cfg 定义Nagios 监控时间段的配置文件
objects/windows.cfg 监控Windows 主机的一个配置文件模板,默认没有启用此文件

6.2 配置文件之间的关系

在nagios的配置过程中涉及到的几个定义有:主机、主机组,服务、服务组,联系人、联系人组,监控时间,监控命令等,从这些定义可以看出,nagios各个配置文件之间是互为关联,彼此引用的。

成功配置出一台nagios监控系统,必须要弄清楚每个配置文件之间依赖与被依赖的关系,最重要的有四点:

第一:定义监控哪些主机、主机组、服务和服务组;
第二:定义这个监控要用什么命令实现;
第三:定义监控的时间段;
第四:定义主机或服务出现问题时要通知的联系人和联系人组。

6.3 配置Nagios

为了能更清楚的说明问题,同时也为了维护方便,建议将nagios各个定义对象创建独立的配置文件:

  • 创建hosts.cfg文件来定义主机和主机组

  • 创建services.cfg文件来定义服务

  • 用默认的contacts.cfg文件来定义联系人和联系人组

  • 用默认的commands.cfg文件来定义命令

  • 用默认的timeperiods.cfg来定义监控时间段

  • 用默认的templates.cfg文件作为资源引用文件

a. templates.cfg文件

nagios主要用于监控主机资源以及服务,在nagios配置中称为对象,为了不必重复定义一些监控对象,Nagios引入了一个模板配置文件,将一些共性的属性定义成模板,以便于多次引用。这就是templates.cfg的作用。

下面详细介绍下templates.cfg文件中每个参数的含义:

define contact{
name generic-contact ; 联系人名称
service_notification_period 24x7 ; 当服务出现异常时,发送通知的时间段,这个时间段"24x7"在timeperiods.cfg文件中定义
host_notification_period 24x7 ; 当主机出现异常时,发送通知的时间段,这个时间段"24x7"在timeperiods.cfg文件中定义
service_notification_options w,u,c,r ; 这个定义的是“通知可以被发出的情况”。w即warn,表示警告状态;u即unknown,表示不明状态; c即criticle,表示紧急状态,r即recover,表示恢复状态,也就是在服务出现警告状态、未知状态、紧急状态和重新恢复状态时都发送通知给使用者。
host_notification_options d,u,r ; 定义主机在什么状态下需要发送通知给使用者,d即down,表示宕机状态; u即unreachable,表示不可到达状态,r即recovery,表示重新恢复状态。
service_notification_commands notify-service-by-email ; 服务故障时,发送通知的方式,可以是邮件和短信,这里发送的方式是邮件,其中“notify-service-by-email”在commands.cfg文件中定义。
host_notification_commands notify-host-by-email ; 主机故障时,发送通知的方式,可以是邮件和短信,这里发送的方式是邮件,其中“notify-host-by-email”在commands.cfg文件中定义。
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE!
}
define host{
name generic-host ; 主机名称,这里的主机名,并不是直接对应到真正机器的主机名; 乃是对应到在主机配置文件里所设定的主机名。
notifications_enabled 1 ; Host notifications are enabled
event_handler_enabled 1 ; Host event handler is enabled
flap_detection_enabled 1 ; Flap detection is enabled
failure_prediction_enabled 1 ; Failure prediction is enabled
process_perf_data 1 ; 其值可以为0或1,其作用为是否启用Nagios的数据输出功能; 如果将此项赋值为1,那么Nagios就会将收集的数据写入某个文件中,以备提取。
retain_status_information 1 ; Retain status information across program restarts
retain_nonstatus_information 1 ; Retain non-status information across program restarts
notification_period 24x7 ; 指定“发送通知”的时间段,也就是可以在什么时候发送通知给使用者。
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
}
define host{
name linux-server ; 主机名称
use generic-host ; use表示引用,也就是将主机generic-host的所有属性引用到linux-server中来;
; 在nagios配置中,很多情况下会用到引用。
check_period 24x7 ; 这里的check_period告诉nagios检查主机的时间段
check_interval 5 ; nagios对主机的检查时间间隔,这里是5分钟。
retry_interval 1 ; 重试检查时间间隔,单位是分钟。
max_check_attempts 10 ; nagios对主机的最大检查次数,也就是nagios在检查发现某主机异常时,并不马上判断为异常状况;
; 而是多试几次,因为有可能只是一时网络太拥挤,或是一些其他原因,让主机受到了一点影响;
; 这里的10就是最多试10次的意思。
check_command check-host-alive ; 指定检查主机状态的命令,其中“check-host-alive”在commands.cfg文件中定义。
notification_period 24x7 ; 主机故障时,发送通知的时间范围,其中“workhours”在timeperiods.cfg中进行了定义;
; 下面会陆续讲到。
notification_interval 10 ; 在主机出现异常后,故障一直没有解决,nagios再次对使用者发出通知的时间。单位是分钟;
; 如果你觉得,所有的事件只需要一次通知就够了,可以把这里的选项设为0
notification_options d,u,r ; 定义主机在什么状态下可以发送通知给使用者,d即down,表示宕机状态;
; u即unreachable,表示不可到达状态;
; r即recovery,表示重新恢复状态。
contact_groups ts ; 指定联系人组,这个“admins”在contacts.cfg文件中定义。
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
}
define host{
name windows-server ; The name of this host template
use generic-host ; Inherit default values from the generic-host template
check_period 24x7 ; By default, Windows servers are monitored round the clock
check_interval 5 ; Actively check the server every 5 minutes
retry_interval 1 ; Schedule host check retries at 1 minute intervals
max_check_attempts 10 ; Check each server 10 times (max)
check_command check-host-alive ; Default command to check if servers are "alive"
notification_period 24x7 ; Send notification out at any time - day or night
notification_interval 10 ; Resend notifications every 30 minutes
notification_options d,r ; Only send notifications for specific host states
contact_groups ts ; Notifications get sent to the admins by default
hostgroups windows-servers ; Host groups that Windows servers should be a member of
register 0 ; DONT REGISTER THIS - ITS JUST A TEMPLATE
}
define service{
name generic-service ; 定义一个服务名称
active_checks_enabled 1 ; Active service checks are enabled
passive_checks_enabled 1 ; Passive service checks are enabled/accepted
parallelize_check 1 ; Active service checks should be parallelized;
; (disabling this can lead to major performance problems)
obsess_over_service 1 ; We should obsess over this service (if necessary)
check_freshness 0 ; Default is to NOT check service 'freshness'
notifications_enabled 1 ; Service notifications are enabled
event_handler_enabled 1 ; Service event handler is enabled
flap_detection_enabled 1 ; Flap detection is enabled
failure_prediction_enabled 1 ; Failure prediction is enabled
process_perf_data 1 ; Process performance data
retain_status_information 1 ; Retain status information across program restarts
retain_nonstatus_information 1 ; Retain non-status information across program restarts
is_volatile 0 ; The service is not volatile
check_period 24x7 ; 这里的check_period告诉nagios检查服务的时间段。
max_check_attempts 3 ; nagios对服务的最��检查次数。
normal_check_interval 5 ; 此选项是用来设置服务检查时间间隔,也就是说,nagios这一次检查和下一次检查之间所隔的时间;
; 这里是5分钟。
retry_check_interval 2 ; 重试检查时间间隔,单位是分钟。
contact_groups ts ; 指定联系人组
notification_options w,u,c,r ; 这个定义的是“通知可以被发出的情况”。w即warn,表示警告状态;
; u即unknown,表示不明状态;
; c即criticle,表示紧急状态,r即recover,表示恢复状态;
; 也就是在服务出现警告状态、未知状态、紧急状态和重新恢复后都发送通知给使用者。
notification_interval 10 ; Re-notify about service problems every hour
notification_period 24x7 ; 指定“发送通知”的时间段,也就是可以在什么时候发送通知给使用者。
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
}
define service{
name local-service ; The name of this service template
use generic-service ; Inherit default values from the generic-service definition
max_check_attempts 4 ; Re-check the service up to 4 times in order to determine its final (hard) state
normal_check_interval 5 ; Check the service every 5 minutes under normal conditions
retry_check_interval 1 ; Re-check the service every minute until a hard state can be determined
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
}

b. resource.cfg文件

resource.cfg是nagios的变量定义文件,文件内容只有一行:

$USER1$=/usr/local/nagios/libexec

其中,变量$USER1$指定了安装nagios插件的路径,如果把插件安装在了其它路径,只需在这里进行修改即可。需要注意的是,变量必须先定义,然后才能在其它配置文件中进行引用。

c. commands.cfg文件

此文件默认是存在的,无需修改即可使用,当然如果有新的命令需要加入时,在此文件进行添加即可。

#notify-host-by-email命令的定义
define command{
command_name notify-host-by-email #命令名称,即定义了一个主机异常时发送邮件的命令。
command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$ #命令具体的执行方式。
}
#notify-service-by-email命令的定义
define command{
command_name notify-service-by-email #命令名称,即定义了一个服务异常时发送邮件的命令
command_line /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
}
#check-host-alive命令的定义
define command{
command_name check-host-alive #命令名称,用来检测主机状态。
command_line $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
# 这里的变量$USER1$在resource.cfg文件中进行定义,即$USER1$=/usr/local/nagios/libexec;
# 那么check_ping的完整路径为/usr/local/nagios/libexec/check_ping;
# “-w 3000.0,80%”中“-w”说明后面的一对值对应的是“WARNING”状态,“80%”是其临界值。
# “-c 5000.0,100%”中“-c”说明后面的一对值对应的是“CRITICAL”,“100%”是其临界值。
# “-p 1”说明每次探测发送一个包。
}
define command{
command_name check_local_disk
command_line $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$ #$ARG1$是指在调用这个命令的时候,命令后面的第一个参数。
}
define command{
command_name check_local_load
command_line $USER1$/check_load -w $ARG1$ -c $ARG2$
}
define command{
command_name check_local_procs
command_line $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
}
define command{
command_name check_local_users
command_line $USER1$/check_users -w $ARG1$ -c $ARG2$
}
define command{
command_name check_local_swap
command_line $USER1$/check_swap -w $ARG1$ -c $ARG2$
}
define command{
command_name check_ftp
command_line $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
}
define command{
command_name check_http
command_line $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
}
define command{
command_name check_ssh
command_line $USER1$/check_ssh $ARG1$ $HOSTADDRESS$
}
define command{
command_name check_ping
command_line $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
}
define command{
command_name check_nt
command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
}

d. hosts.cfg文件

此文件默认不存在,需要手动创建,hosts.cfg主要用来指定被监控的主机地址以及相关属性信息,根据实验目标配置如下:

define host{
use linux-server #引用主机linux-server的属性信息,linux-server主机在templates.cfg文件中进行了定义。
host_name Nagios-Linux #主机名
alias Nagios-Linux #主机别名
address 192.168.1.111 #被监控的主机地址,这个地址可以是ip,也可以是域名。
}
#定义一个主机组
define hostgroup{
hostgroup_name bsmart-servers #主机组名称,可以随意指定。
alias bsmart servers #主机组别名
members Nagios-Linux #主机组成员,其中“Nagios-Linux”就是上面定义的主机。
}

注意:在/usr/local/nagios/etc/objects 下默认有localhost.cfg 和windows.cfg 这两个配置文件,localhost.cfg 文件是定义监控主机本身的,windows.cfg 文件是定义windows 主机的,其中包括了对host 和相关services 的定义。所以在本次实验中,将直接在localhost.cfg 中定义监控主机(Nagios-Server),在windows.cfg中定义windows 主机(Nagios-Windows)。根据自己的需要修改其中的相关配置,详细如下:

localhost.cfg

define host{
use linux-server ; Name of host template to use
; This host definition will inherit all variables that are defined
; in (or inherited by) the linux-server host template definition.
host_name Nagios-Server
alias Nagios-Server
address 127.0.0.1
}
define hostgroup{
hostgroup_name linux-servers ; The name of the hostgroup
alias Linux Servers ; Long name of the group
members Nagios-Server ; Comma separated list of hosts that belong to this group
}
define service{
use local-service ; Name of service template to use
host_name Nagios-Server
service_description PING
check_command check_ping!100.0,20%!500.0,60%
}
define service{
use local-service ; Name of service template to use
host_name Nagios-Server
service_description Root Partition
check_command check_local_disk!20%!10%!/
}
define service{
use local-service ; Name of service template to use
host_name Nagios-Server
service_description Current Users
check_command check_local_users!20!50
}
define service{
use local-service ; Name of service template to use
host_name Nagios-Server
service_description Total Processes
check_command check_local_procs!250!400!RSZDT
}
define service{
use local-service ; Name of service template to use
host_name Nagios-Server
service_description Current Load
check_command check_local_load!5.0,4.0,3.0!10.0,6.0,4.0
}
define service{
use local-service ; Name of service template to use
host_name Nagios-Server
service_description Swap Usage
check_command check_local_swap!20!10
}
define service{
use local-service ; Name of service template to use
host_name Nagios-Server
service_description SSH
check_command check_ssh
notifications_enabled 0
}
define service{
use local-service ; Name of service template to use
host_name Nagios-Server
service_description HTTP
check_command check_http
notifications_enabled 0
}

windows.cfg

define host{
use windows-server ; Inherit default values from a template
host_name Nagios-Windows ; The name we're giving to this host
alias My Windows Server ; A longer name associated with the host
address 192.168.1.113 ; IP address of the host
}
define hostgroup{
hostgroup_name windows-servers ; The name of the hostgroup
alias Windows Servers ; Long name of the group
}
define service{
use generic-service
host_name Nagios-Windows
service_description NSClient++ Version
check_command check_nt!CLIENTVERSION
}
define service{
use generic-service
host_name Nagios-Windows
service_description Uptime
check_command check_nt!UPTIME
}
define service{
use generic-service
host_name Nagios-Windows
service_description CPU Load
check_command check_nt!CPULOAD!-l 5,80,90
}
define service{
use generic-service
host_name Nagios-Windows
service_description Memory Usage
check_command check_nt!MEMUSE!-w 80 -c 90
}
define service{
use generic-service
host_name Nagios-Windows
service_description C:\ Drive Space
check_command check_nt!USEDDISKSPACE!-l c -w 80 -c 90
}
define service{
use generic-service
host_name Nagios-Windows
service_description W3SVC
check_command check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
}
define service{
use generic-service
host_name Nagios-Windows
service_description Explorer
check_command check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
}

e. services.cfg文件

此文件默认也不存在,需要手动创建,services.cfg文件主要用于定义监控的服务和主机资源,例如监控http服务、ftp服务、主机磁盘空间、主机系统负载等等。Nagios-Server 和Nagios-Windows 相关服务已在相应的配置文件中定义,所以这里只需要定义Nagios-Linux 相关服务即可,这里只定义一个检测是否存活的服务来验证配置文件的正确性,其他服务的定义将在后面讲到。

define service{
use local-service #引用local-service服务的属性值,local-service在templates.cfg文件中进行了定义。
host_name Nagios-Linux #指定要监控哪个主机上的服务,“Nagios-Server”在hosts.cfg文件中进行了定义。
service_description check-host-alive #对监控服务内容的描述,以供维护人员参考。
check_command check-host-alive #指定检查的命令。
}

f. contacts.cfg文件

contacts.cfg是一个定义联系人和联系人组的配置文件,当监控的主机或者服务出现故障,nagios会通过指定的通知方式(邮件或者短信)将信息发给这里指定的联系人或者使用者。

define contact{
contact_name David #联系人的名称,这个地方不要有空格
use generic-contact #引用generic-contact的属性信息,其中“generic-contact”在templates.cfg文件中进行定义
alias Nagios Admin
email david.tang@bsmart.cn
}

define contactgroup{
contactgroup_name ts #联系人组的名称,同样不能空格
alias Technical Support #联系人组描述
members David #联系人组成员,其中“david”就是上面定义的联系人,如果有多个联系人则以逗号相隔
}

g. timeperiods.cfg文件

此文件只要用于定义监控的时间段,下面是一个配置好的实例:

#下面是定义一个名为24x7的时间段,即监控所有时间段
define timeperiod{
timeperiod_name 24x7 #时间段的名称,这个地方不要有空格
alias 24 Hours A Day, 7 Days A Week
sunday 00:00-24:00
monday 00:00-24:00
tuesday 00:00-24:00
wednesday 00:00-24:00
thursday 00:00-24:00
friday 00:00-24:00
saturday 00:00-24:00
}
#下面是定义一个名为workhours的时间段,即工作时间段。
define timeperiod{
timeperiod_name workhours
alias Normal Work Hours
monday 09:00-17:00
tuesday 09:00-17:00
wednesday 09:00-17:00
thursday 09:00-17:00
friday 09:00-17:00
}

h. cgi.cfg文件

此文件用来控制相关cgi脚本,如果想在nagios的web监控界面执行cgi脚本,例如重启nagios进程、关闭nagios通知、停止nagios主机检测等,这时就需要配置cgi.cfg文件了。
由于nagios的web监控界面验证用户为david,所以只需在cgi.cfg文件中添加此用户的执行权限就可以了,需要修改的配置信息如下:

default_user_name=david
authorized_for_system_information=nagiosadmin,david
authorized_for_configuration_information=nagiosadmin,david
authorized_for_system_commands=david
authorized_for_all_services=nagiosadmin,david
authorized_for_all_hosts=nagiosadmin,david
authorized_for_all_service_commands=nagiosadmin,david
authorized_for_all_host_commands=nagiosadmin,david

i. nagios.cfg文件

nagios.cfg默认的路径为/usr/local/nagios/etc/nagios.cfg,是nagios的核心配置文件,所有的对象配置文件都必须在这个文件中进行定义才能发挥其作用,这里只需将对象配置文件在Nagios.cfg文件中进行引用即可。

6.4 验证Nagios 配置文件的正确性

Nagios 在验证配置文件方面做的非常到位,只需通过一个命令即可完成:

# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
 
Nagios提供的这个验证功能非常有用,在错误信息中通常会打印出错误的配置文件以及文件中的哪一行,这使得nagios的配置变得非常容易,报警信息通常是可以忽略的,因为一般那些只是建议性的。

看到上面这些信息就说明没问题了,然后启动Nagios 服务。

linux
本文评论   查看全部评论 (0)
表情: 表情 姓名: 字数

       

评论声明
  • 尊重网上道德,遵守中华人民共和国的各项有关法律法规
  • 承担一切因您的行为而直接或间接导致的民事或刑事法律责任
  • 本站管理人员有权保留或删除其管辖留言中的任意内容
  • 本站有权在网站内转载或引用您的评论
  • 参与本评论即表明您已经阅读并接受上述条款