手机版
你好,游客 登录 注册 搜索
背景:
阅读新闻

MySQL在ROW模式下通过binlog提取SQL语句

[日期:2016-01-30] 来源:Linux社区  作者:Hank.Yoon [字体: ]

Linux
基于row模式的binlog,生成DML(insert/update/delete)的rollback语句
通过MySQLbinlog -v 解析binlog生成可读的sql文件
提取需要处理的有效sql
  "### "开头的行.如果输入的start-position位于某个event group中间,则会导致"无法识别event"错误


将INSERT/UPDATE/DELETE 的sql反转,并且1个完整sql只能占1行
  INSERT: INSERT INTO => DELETE FROM, SET => WHERE
  UPDATE: WHERE => SET, SET => WHERE
  DELETE: DELETE FROM => INSERT INTO, WHERE => SET
用列名替换位置@{1,2,3}
  通过desc table获得列顺序及对应的列名
  特殊列类型value做特别处理
逆序

注意:
  表结构与现在的表结构必须相同[谨记]
  由于row模式是幂等的,并且恢复是一次性,所以只提取sql,不提取BEGIN/COMMIT
  只能对INSERT/UPDATE/DELETE进行处理

mysql> select * from yoon;
+----------+------------+-----------+---------------------+
| actor_id | first_name | last_name | last_update         |
+----------+------------+-----------+---------------------+
|        1 | HANK       | YOON      | 2006-02-15 04:34:33 |
|        2 | HANK       | YOON      | 2006-02-15 04:34:33 |
|        3 | HANK       | YOON      | 2006-02-15 04:34:33 |
|        4 | HANK       | YOON      | 2006-02-15 04:34:33 |
|        5 | HANK       | YOON      | 2006-02-15 04:34:33 |
|        6 | HANK       | YOON      | 2006-02-15 04:34:33 |
|        7 | HANK       | YOON      | 2006-02-15 04:34:33 |
|        8 | HANK       | YOON      | 2006-02-15 04:34:33 |
|        9 | HANK       | YOON      | 2006-02-15 04:34:33 |
|       10 | HANK       | YOON      | 2006-02-15 04:34:33 |
|       11 | HANK       | YOON      | 2006-02-15 04:34:33 |
+----------+------------+-----------+---------------------+
11 rows in set (0.00 sec)


mysql> delete from yoon;
Query OK, 11 rows affected (1.03 sec)


mysql> select * from yoon;
Empty set (0.00 sec)

命令之间的空格一定要注意,否则就会无法提取SQL语句:
[root@hank-yoon data]# perl binlog-rollback.pl -f 'mysql-bin.000001' -o '/export/data/mysql/data/yoon.sql' -u 'root' -p 'yoon'
Warning: Using a password on the command line interface can be insecure.
[root@hank-yoon data]# ls
auto.cnf            hank     ibdata2      ib_logfile1  modify.pl  mysql-bin.000001  performance_schema  test  yoon.sql
binlog-rollback.pl  ibdata1  ib_logfile0  ib_logfile2  mysql      mysql-bin.index   sakila              yoon
[root@hank-yoon data]# cat yoon.sql 
INSERT INTO `yoon`.`yoon` SET `actor_id`=11, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=10, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=9, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=8, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=7, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=6, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=5, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=4, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=3, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=2, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
INSERT INTO `yoon`.`yoon` SET `actor_id`=1, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);

mysql> INSERT INTO `yoon`.`yoon` SET `actor_id`=11, `first_name`='HANK', `last_name`='YOON', `last_update`=from_unixtime(1139949273);
Query OK, 1 row affected (0.01 sec)


mysql> select * from yoon;
+----------+------------+-----------+---------------------+
| actor_id | first_name | last_name | last_update         |
+----------+------------+-----------+---------------------+
|       11 | HANK       | YOON      | 2006-02-15 04:34:33 |
+----------+------------+-----------+---------------------+

  • #!/usr/lib/perl -w
  • use strict;
  • use warnings;
  • use Class::Struct;
  • use Getopt::Long qw(:config no_ignore_case);                    # GetOption
  • # register handler system signals
  • use sigtrap 'handler', \&sig_int, 'normal-signals';
  • # catch signal
  • sub sig_int(){
  •     my ($signals) = @_;
  •     print STDERR "# Caught SIG$signals.\n";
  •     exit 1;
  • }
  • my %opt;
  • my $srcfile;
  • my $host = '127.0.0.1';
  • my $port = 3306;
  • my ($user,$pwd);
  • my ($MYSQL, $MYSQLBINLOG, $ROLLBACK_DML);
  • my $outfile = '/dev/null';
  • my (%do_dbs,%do_tbs);
  • # tbname=>tbcol, tbcol: @n=>colname,type
  • my %tbcol_pos;
  • my $SPLITER_COL = ',';
  • my $SQLTYPE_IST = 'INSERT';
  • my $SQLTYPE_UPD = 'UPDATE';
  • my $SQLTYPE_DEL = 'DELETE';
  • my $SQLAREA_WHERE = 'WHERE';
  • my $SQLAREA_SET = 'SET';
  • my $PRE_FUNCT = '========================== ';
  • # =========================================================
  • # 基于row模式的binlog,生成DML(insert/update/delete)的rollback语句
  • # 通过mysqlbinlog -v 解析binlog生成可读的sql文件
  • # 提取需要处理的有效sql
  • #     "### "开头的行.如果输入的start-position位于某个event group中间,则会导致"无法识别event"错误
  • #
  • # 将INSERT/UPDATE/DELETE 的sql反转,并且1个完整sql只能占1行
  • #     INSERT: INSERT INTO => DELETE FROM, SET => WHERE
  • #     UPDATE: WHERE => SET, SET => WHERE
  • #     DELETE: DELETE FROM => INSERT INTO, WHERE => SET
  • # 用列名替换位置@{1,2,3}
  • #     通过desc table获得列顺序及对应的列名
  • #     特殊列类型value做特别处理
  • # 逆序
  • # 注意:
  • #     表结构与现在的表结构必须相同[谨记]
  • #     由于row模式是幂等的,并且恢复是一次性,所以只提取sql,不提取BEGIN/COMMIT
  • #     只能对INSERT/UPDATE/DELETE进行处理
  • # ========================================================
  • sub main{
  •     # get input option
  •     &get_options();
  •     # 
  •     &init_tbcol();
  •     #
  •     &do_binlog_rollback();
  • }
  • &main();
  • # ----------------------------------------------------------------------------------------
  • # Func : get options and set option flag 
  • # ----------------------------------------------------------------------------------------
  • sub get_options{
  •     #Get options info
  •     GetOptions(\%opt,
  •         'help',                    # OUT : print help info 
  •         'f|srcfile=s',            # IN : binlog file
  •         'o|outfile=s',            # out : output sql file
  •         'h|host=s',                # IN : host
  •         'u|user=s', # IN : user
  •         'p|password=s', # IN : password
  •         'P|port=i',                # IN : port
  •         'start-datetime=s',        # IN : start datetime
  •         'stop-datetime=s',        # IN : stop datetime
  •         'start-position=i',        # IN : start position
  •         'stop-position=i',        # IN : stop position
  •         'd|database=s',            # IN : database, split comma
  •         'T|table=s',            # IN : table, split comma
  •         'i|ignore',                # IN : ignore binlog check ddl and so on
  •         'debug',                # IN : print debug information
  •      ) or print_usage();
  •     if (!scalar(%opt)) {
  •         &print_usage();
  •     }
  •     # Handle for options
  •     if ($opt{'f'}){
  •         $srcfile = $opt{'f'};
  •     }else{
  •         &merror("please input binlog file");
  •     }
  •     $opt{'h'} and $host = $opt{'h'};
  •     $opt{'u'} and $user = $opt{'u'};
  •     $opt{'p'} and $pwd = $opt{'p'};
  •     $opt{'P'} and $port = $opt{'P'};
  •     if ($opt{'o'}) {
  •         $outfile = $opt{'o'};
  •         # 清空 outfile
  •         `echo '' > $outfile`;
  •     }
  •     # 
  •     $MYSQL = qq{mysql -h$host -u$user -p'$pwd' -P$port};
  •     &mdebug("get_options::MYSQL\n\t$MYSQL");
  •     # 提取binlog,不需要显示列定义信息,用-v,而不用-vv
  •     $MYSQLBINLOG = qq{mysqlbinlog -v};
  •     $MYSQLBINLOG .= " --start-position=".$opt{'start-position'} if $opt{'start-position'};
  •     $MYSQLBINLOG .= " --stop-position=".$opt{'stop-position'} if $opt{'stop-postion'};
  •     $MYSQLBINLOG .= " --start-datetime='".$opt{'start-datetime'}."'" if $opt{'start-datetime'};
  •     $MYSQLBINLOG .= " --stop-datetime='$opt{'stop-datetime'}'" if $opt{'stop-datetime'};
  •     $MYSQLBINLOG .= " $srcfile";
  •     &mdebug("get_options::MYSQLBINLOG\n\t$MYSQLBINLOG");
  •     # 检查binlog中是否含有 ddl sql: CREATE|ALTER|DROP|RENAME
  •     &check_binlog() unless ($opt{'i'});
  •     # 不使用mysqlbinlog过滤,USE dbname;方式可能会漏掉某些sql,所以不在mysqlbinlog过滤
  •     # 指定数据库
  •     if ($opt{'d'}){
  •         my @dbs = split(/,/,$opt{'d'});
  •         foreach my $db (@dbs){
  •             $do_dbs{$db}=1;
  •         }
  •     }
  •     # 指定表
  •     if ($opt{'T'}){
  •         my @tbs = split(/,/,$opt{'T'});
  •         foreach my $tb (@tbs){
  •             $do_tbs{$tb}=1;
  •         }
  •     }
  •     # 提取有效DML SQL
  •     $ROLLBACK_DML = $MYSQLBINLOG." | grep '^### '";
  •     # 去掉注释: '### ' -> ''
  •     # 删除首尾空格
  •     $ROLLBACK_DML .= " | sed 's/###\\s*//g;s/\\s*\$//g'";
  •     &mdebug("rollback dml\n\t$ROLLBACK_DML");
  •    
  •     # 检查内容是否为空
  •     my $cmd = "$ROLLBACK_DML | wc -l";
  •     &mdebug("check contain dml sql\n\t$cmd");
  •     my $size = `$cmd`;
  •     chomp($size);
  •     unless ($size >0){
  •         &merror("binlog DML is empty:$ROLLBACK_DML");
  •     };
  • }   
  • # ----------------------------------------------------------------------------------------
  • # Func : check binlog contain DDL
  • # ----------------------------------------------------------------------------------------
  • sub check_binlog{
  •     &mdebug("$PRE_FUNCT check_binlog");
  •     my $cmd = "$MYSQLBINLOG ";
  •     $cmd .= " | grep -E -i '^(CREATE|ALTER|DROP|RENAME)' ";
  •     &mdebug("check binlog has DDL cmd\n\t$cmd");
  •     my $ddlcnt = `$cmd`;
  •     chomp($ddlcnt);
  •     my $ddlnum = `$cmd | wc -l`;
  •     chomp($ddlnum);
  •     my $res = 0;
  •     if ($ddlnum>0){
  •         # 在ddl sql前面加上前缀<DDL>
  •         $ddlcnt = `echo '$ddlcnt' | sed 's/^//g'`;
  •         &merror("binlog contain $ddlnum DDL:$MYSQLBINLOG. ddl sql:\n$ddlcnt");
  •     }
  •     return $res;
  • }
  • # ----------------------------------------------------------------------------------------
  • # Func : init all table column order
  • #        if input --database --table params, only get set table column order
  • # ----------------------------------------------------------------------------------------
  • sub init_tbcol{
  •     &mdebug("$PRE_FUNCT init_tbcol");
  •     # 提取DML语句
  •     my $cmd .= "$ROLLBACK_DML | grep -E '^(INSERT|UPDATE|DELETE)'";
  •     # 提取表名,并去重
  •     #$cmd .= " | awk '{if (\$1 ~ \"^UPDATE\") {print \$2}else {print \$3}}' | uniq ";
  •     $cmd .= " | awk '{if (\$1 ~ \"^UPDATE\") {print \$2}else {print \$3}}' | sort | uniq ";
  •     &mdebug("get table name cmd\n\t$cmd");
  •     open ALLTABLE, "$cmd | " or die "can't open file:$cmd\n";
  •     while (my $tbname = <ALLTABLE>){
  •         chomp($tbname);
  •         #if (exists $tbcol_pos{$tbname}){
  •         #    next;
  •         #}
  •         &init_one_tbcol($tbname) unless (&ignore_tb($tbname));
  •        
  •     }
  •     close ALLTABLE or die "can't close file:$cmd\n";
  •     # init tb col
  •     foreach my $tb (keys %tbcol_pos){
  •         &mdebug("tbname->$tb");
  •         my %colpos = %{$tbcol_pos{$tb}};
  •         foreach my $pos (keys %colpos){
  •             my $col = $colpos{$pos};
  •             my ($cname,$ctype) = split(/$SPLITER_COL/, $col);
  •             &mdebug("\tpos->$pos,cname->$cname,ctype->$ctype");
  •         }
  •     }
  • };
  • # ----------------------------------------------------------------------------------------
  • # Func : init one table column order
  • # ----------------------------------------------------------------------------------------
  • sub init_one_tbcol{
  •     my $tbname = shift;
  •     &mdebug("$PRE_FUNCT init_one_tbcol");
  •     # 获取表结构及列顺序
  •     my $cmd = $MYSQL." --skip-column-names --silent -e 'desc $tbname'";
  •     # 提取列名,并拼接
  •     $cmd .= " | awk -F\'\\t\' \'{print NR\"$SPLITER_COL`\"\$1\"`$SPLITER_COL\"\$2}'";
  •     &mdebug("get table column infor cmd\n\t$cmd");
  •     open TBCOL,"$cmd | " or die "can't open desc $tbname;";
  •     my %colpos;
  •     while (my $line = <TBCOL>){
  •         chomp($line);
  •         my ($pos,$col,$coltype) = split(/$SPLITER_COL/,$line);
  •         &mdebug("linesss=$line\n\t\tpos=$pos\n\t\tcol=$col\n\t\ttype=$coltype");
  •         $colpos{$pos} = $col.$SPLITER_COL.$coltype;
  •     }
  •     close TBCOL or die "can't colse desc $tbname";
  •     $tbcol_pos{$tbname} = \%colpos;
  • }
  • # ----------------------------------------------------------------------------------------
  • # Func : rollback sql:    INSERT/UPDATE/DELETE
  • # ----------------------------------------------------------------------------------------
  • sub do_binlog_rollback{
  •     my $binlogfile = "$ROLLBACK_DML ";
  •     &mdebug("$PRE_FUNCT do_binlog_rollback");
  •     # INSERT|UPDATE|DELETE
  •     my $sqltype;
  •     # WHERE|SET
  •     my $sqlarea;
  •    
  •     my ($tbname, $sqlstr) = ('', '');
  •     my ($notignore, $isareabegin) = (0,0);
  •     # output sql file
  •     open SQLFILE, ">> $outfile" or die "Can't open sql file:$outfile";
  •     # binlog file
  •     open BINLOG, "$binlogfile |" or die "Can't open file: $binlogfile";
  •     while (my $line = <BINLOG>){
  •         chomp($line);
  •         if ($line =~ /^(INSERT|UPDATE|DELETE)/){
  •             # export sql
  •             if ($sqlstr ne ''){
  •                 $sqlstr .= ";\n";
  •                 print SQLFILE $sqlstr;
  •                 &mdebug("export sql\n\t".$sqlstr);
  •                 $sqlstr = '';
  •             }
  •             if ($line =~ /^INSERT/){
  •                 $sqltype = $SQLTYPE_IST;
  •                 $tbname = `echo '$line' | awk '{print \$3}'`;
  •                 chomp($tbname);
  •                 $sqlstr = qq{DELETE FROM $tbname};
  •             }elsif ($line =~ /^UPDATE/){
  •                 $sqltype = $SQLTYPE_UPD;
  •                 $tbname = `echo '$line' | awk '{print \$2}'`;
  •                 chomp($tbname);
  •                 $sqlstr = qq{UPDATE $tbname};
  •             }elsif ($line =~ /^DELETE/){
  •                 $sqltype = $SQLTYPE_DEL;   
  •                 $tbname = `echo '$line' | awk '{print \$3}'`;
  •                 chomp($tbname);
  •                 $sqlstr = qq{INSERT INTO $tbname};
  •             }
  •             # check ignore table
  •             if(&ignore_tb($tbname)){
  •                 $notignore = 0;
  •                 &mdebug("#IGNORE#:line:".$line);
  •                 $sqlstr = '';
  •             }else{
  •                 $notignore = 1;
  •                 &mdebug("#DO#:line:".$line);
  •             }
  •         }else {
  •             if($notignore){
  •                 &merror("can't get tbname") unless (defined($tbname));
  •                 if ($line =~ /^WHERE/){
  •                     $sqlarea = $SQLAREA_WHERE;
  •                     $sqlstr .= qq{ SET};
  •                     $isareabegin = 1;
  •                 }elsif ($line =~ /^SET/){
  •                     $sqlarea = $SQLAREA_SET;
  •                     $sqlstr .= qq{ WHERE};
  •                     $isareabegin = 1;
  •                 }elsif ($line =~ /^\@/){
  •                     $sqlstr .= &deal_col_value($tbname, $sqltype, $sqlarea, $isareabegin, $line);
  •                     $isareabegin = 0;
  •                 }else{
  •                     &mdebug("::unknown sql:".$line);
  •                 }
  •             }
  •         }
  •     }
  •     # export last sql
  •     if ($sqlstr ne ''){
  •         $sqlstr .= ";\n";
  •         print SQLFILE $sqlstr;
  •         &mdebug("export sql\n\t".$sqlstr);
  •     }
  •    
  •     close BINLOG or die "Can't close binlog file: $binlogfile";
  •     close SQLFILE or die "Can't close out sql file: $outfile";
  •     # 逆序
  •     # 1!G: 只有第一行不执行G, 将hold space中的内容append回到pattern space
  •     # h: 将pattern space 拷贝到hold space
  •     # $!d: 除最后一行都删除
  •     my $invert = "sed -i '1!G;h;\$!d' $outfile";
  •     my $res = `$invert`;
  •     &mdebug("inverter order sqlfile :$invert");
  • }
  • # ----------------------------------------------------------------------------------------
  • # Func : transfer column pos to name
  • #    deal column value
  • #
  • # &deal_col_value($tbname, $sqltype, $sqlarea, $isareabegin, $line);
  • # ----------------------------------------------------------------------------------------
  • sub deal_col_value($$$$$){
  •     my ($tbname, $sqltype, $sqlarea, $isareabegin, $line) = @_;
  •     &mdebug("$PRE_FUNCT deal_col_value");
  •     &mdebug("input:tbname->$tbname,type->$sqltype,area->$sqlarea,areabegin->$isareabegin,line->$line");
  •     my @vals = split(/=/, $line);
  •     my $pos = substr($vals[0],1);
  •     my $valstartpos = length($pos)+2;
  •     my $val = substr($line,$valstartpos);
  •     my %tbcol = %{$tbcol_pos{$tbname}};
  •     my ($cname,$ctype) = split(/$SPLITER_COL/,$tbcol{$pos});
  •     &merror("can't get $tbname column $cname type") unless (defined($cname) || defined($ctype));
  •     &mdebug("column infor:cname->$cname,type->$ctype");
  •     # join str
  •     my $joinstr;
  •     if ($isareabegin){
  •         $joinstr = ' ';
  •     }else{
  •         # WHERE 被替换为 SET, 使用 , 连接
  •         if ($sqlarea eq $SQLAREA_WHERE){
  •             $joinstr = ', ';
  •         # SET 被替换为 WHERE 使用 AND 连接
  •         }elsif ($sqlarea eq $SQLAREA_SET){
  •             $joinstr = ' AND ';
  •         }else{
  •             &merror("!!!!!!The scripts error");
  •         }
  •     }
  •    
  •     # 
  •     my $newline = $joinstr;
  •     # NULL value
  •     if (($val eq 'NULL') && ($sqlarea eq $SQLAREA_SET)){
  •         $newline .= qq{ $cname IS NULL};
  •     }else{
  •         # timestamp: record seconds
  •         if ($ctype eq 'timestamp'){
  •             $newline .= qq{$cname=from_unixtime($val)};
  •         # datetime: @n=yyyy-mm-dd hh::ii::ss
  •         }elsif ($ctype eq 'datetime'){
  •             $newline .= qq{$cname='$val'};
  •         }else{
  •             $newline .= qq{$cname=$val};
  •         }
  •     }
  •     &mdebug("\told>$line\n\tnew>$newline");
  •    
  •     return $newline;
  • }
  • # ----------------------------------------------------------------------------------------
  • # Func : check is ignore table
  • # params: IN table full name # format:`dbname`.`tbname`
  • # RETURN:
  • #        0 not ignore
  • #        1 ignore
  • # ----------------------------------------------------------------------------------------
  • sub ignore_tb($){
  •     my $fullname = shift;
  •     # 删除`
  •     $fullname =~ s/`//g;
  •     my ($dbname,$tbname) = split(/\./,$fullname);
  •     my $res = 0;
  •    
  •     # 指定了数据库
  •     if ($opt{'d'}){
  •         # 与指定库相同
  •         if ($do_dbs{$dbname}){
  •             # 指定表
  •             if ($opt{'T'}){
  •                 # 与指定表不同
  •                 unless ($do_tbs{$tbname}){
  •                     $res = 1;
  •                 }
  •             }
  •         # 与指定库不同
  •         }else{
  •             $res = 1;
  •         }
  •     }
  •     #&mdebug("Table check ignore:$fullname->$res");
  •     return $res;
  • }
  • # ----------------------------------------------------------------------------------------
  • # Func : print debug msg
  • # ----------------------------------------------------------------------------------------
  • sub mdebug{
  •     my (@msg) = @_;
  •     print "@msg\n" if ($opt{'debug'});
  • }
  • # ----------------------------------------------------------------------------------------
  • # Func : print error msg and exit
  • # ----------------------------------------------------------------------------------------
  • sub merror{
  •     my (@msg) = @_;
  •     print ":@msg\n";
  •     &print_usage();
  •     exit(1);
  • }
  • # ----------------------------------------------------------------------------------------
  • # Func : print usage
  • # ----------------------------------------------------------------------------------------
  • sub print_usage{
  •     print <<EOF;
  • ==========================================================================================
  • Command line options :
  •     --help                # OUT : print help info 
  •     -f, --srcfile            # IN : binlog file. [required]
  •     -o, --outfile            # OUT : output sql file. [required]
  •     -h, --host            # IN : host. default '127.0.0.1'
  •     -u, --user            # IN : user. [required]
  •     -p, --password            # IN : password. [required] 
  •     -P, --port            # IN : port. default '3306'
  •     --start-datetime        # IN : start datetime
  •     --stop-datetime            # IN : stop datetime
  •     --start-position        # IN : start position
  •     --stop-position            # IN : stop position
  •     -d, --database            # IN : database, split comma
  •     -T, --table            # IN : table, split comma. [required] set -d
  •     -i, --ignore            # IN : ignore binlog check contain DDL(CREATE|ALTER|DROP|RENAME)
  •     --debug                # IN : print debug information
  • Sample :
  •    shell> perl binlog-rollback.pl -f 'mysql-bin.000001' -o '/tmp/t.sql' -u 'user' -p 'pwd' 
  •    shell> perl binlog-rollback.pl -f 'mysql-bin.000001' -o '/tmp/t.sql' -u 'user' -p 'pwd' -i
  •    shell> perl binlog-rollback.pl -f 'mysql-bin.000001' -o '/tmp/t.sql' -u 'user' -p 'pwd' --debug
  •    shell> perl binlog-rollback.pl -f 'mysql-bin.000001' -o '/tmp/t.sql' -h '192.168.1.2' -u 'user' -p 'pwd' -P 3307
  •    shell> perl binlog-rollback.pl -f 'mysql-bin.000001' -o '/tmp/t.sql' -u 'user' -p 'pwd' --start-position=107
  •    shell> perl binlog-rollback.pl -f 'mysql-bin.000001' -o '/tmp/t.sql' -u 'user' -p 'pwd' --start-position=107 --stop-position=10000
  •    shell> perl binlog-rollback.pl -f 'mysql-bin.000001' -o '/tmp/t.sql' -u 'user' -p 'pwd' -d 'db1,db2'
  •    shell> perl binlog-rollback.pl -f 'mysql-bin.0000*' -o '/tmp/t.sql' -u 'user' -p 'pwd' -d 'db1,db2' -T 'tb1,tb2'
  • ==========================================================================================
  • EOF
  •     exit; 
  • }
  • 1;

关于使用MySQL binlog对数据进行恢复的实战  http://www.linuxidc.com/Linux/2016-01/127808.htm

MySQL 5.6.12切换binlog二进制日志路径  http://www.linuxidc.com/Linux/2016-01/126979.htm

mysqlbinlog解析binlog乱码问题解密  http://www.linuxidc.com/Linux/2016-01/126978.htm

MySQL通过binlog来恢复数据  http://www.linuxidc.com/Linux/2015-12/126897.htm

MySQL binlog 组提交与 XA(两阶段提交)  http://www.linuxidc.com/Linux/2015-11/124942.htm

MySQL使用备份和binlog进行数据恢复 http://www.linuxidc.com/Linux/2014-12/110875.htm

本文永久更新链接地址http://www.linuxidc.com/Linux/2016-01/128006.htm

linux
相关资讯       binlog 
本文评论   查看全部评论 (0)
表情: 表情 姓名: 字数

       

评论声明
  • 尊重网上道德,遵守中华人民共和国的各项有关法律法规
  • 承担一切因您的行为而直接或间接导致的民事或刑事法律责任
  • 本站管理人员有权保留或删除其管辖留言中的任意内容
  • 本站有权在网站内转载或引用您的评论
  • 参与本评论即表明您已经阅读并接受上述条款