手机版
你好,游客 登录 注册
背景:
阅读新闻

ELK实时日志分析平台5.0版本源码安装配置

[日期:2017-09-28] 来源:Linux社区  作者:Linux [字体: ]

目录

一、 安装Java. 1

二、 安装elasticsearch. 2

三、 配置elasticsearch. 2

四、 安装logstash. 3

五、 配置 logstash. 3

六、 安装kibana. 4

七、 配置kibana. 5

八、 安装x-pack插件... 5

九、 x-pack管理用户... 6

1、 添加用户... 6

2、 查看用户... 6

3、 测试用户登录... 6

4、 删除用户... 6

十、 安装filebeat. 7

一、 安装JAVA

# mkdir /usr/local/java/ –p

# cd /usr/local/java/# tar zxvf /data/elk5.0/jdk-8u111-linux-x64.tar.gz

# cat >>/etc/profile<<EOF

export JAVA_HOME=/usr/local/java/jdk1.8.0_111

export PATH=$PATH:$JAVA_HOME/bin

export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar

EOF

# source /etc/profile

# java -version

java version "1.8.0_111"Java(TM) SE Runtime Environment (build 1.8.0_111-b14)

Java HotSpot(TM) 64-Bit Server VM (build 25.111-b14, mixed mode)

二、 安装elasticsearch

# mkdir /data/PRG/ -p

# cd /data/PRG/# tar zxvf /data/elk5.0/elasticsearch-5.0.2.tar.gz

# mv elasticsearch-5.0.2 elasticsearch

# useradd elasticsearch -s /sbin/nologin

# chown elasticsearch. elasticsearch /data/PRG/elasticsearch/

 

 

添加启动脚本

vi /etc/init.d/elasticsearch

#!/bin/sh#
# elasticsearch <summary>#
# chkconfig:   2345 80 20# description: Starts and stops a single elasticsearch instance on this system
#

### BEGIN INIT INFO
# Provides: Elasticsearch
# Required-Start: $network $named
# Required-Stop: $network $named
# Default-Start: 2 3 4 5# Default-Stop: 0 1 6# Short-Description: This service manages the elasticsearch daemon
# Description: Elasticsearch is a very scalable, schema-free and high-performance search solution supporting multi-tenancy and near realtime search.
### END INIT INFO

#
# init.d / servicectl compatibility (openSUSE)
#if [ -f /etc/rc.status ]; then. /etc/rc.status
    rc_resetfi#
# Source function library.
#if [ -f /etc/rc.d/init.d/functions ]; then. /etc/rc.d/init.d/functionsfi# Sets the default values for elasticsearch variables used in this script
ES_USER="elasticsearch"ES_GROUP="elasticsearch"ES_HOME="/data/PRG/elasticsearch"MAX_OPEN_FILES=65536MAX_MAP_COUNT=262144LOG_DIR="/var/log/elasticsearch"DATA_DIR="/var/lib/elasticsearch"CONF_DIR="/data/PRG/elasticsearch/config"PID_DIR="/var/run/elasticsearch"# Source the default env fileES_ENV_FILE="/etc/sysconfig/elasticsearch"if [ -f "$ES_ENV_FILE" ]; then. "$ES_ENV_FILE"fi# CONF_FILE setting was removedif [ ! -z "$CONF_FILE" ]; thenecho "CONF_FILE setting is no longer supported. elasticsearch.yml must be placed in the config directory and cannot be renamed."exit 1fiexec="$ES_HOME/bin/elasticsearch"prog="elasticsearch"pidfile="$PID_DIR/${prog}.pid"export ES_HEAP_SIZE
export ES_HEAP_NEWSIZE
export ES_DIRECT_SIZE
export ES_JAVA_OPTS
export ES_GC_LOG_FILE
export ES_STARTUP_SLEEP_TIME
export JAVA_HOME
export ES_INCLUDElockfile=/var/lock/subsys/$prog

# backwards compatibility for old config sysconfig files, pre 0.90.1if [ -n $USER ] && [ -z $ES_USER ] ; then
   ES_USER=$USERficheckJava() {if [ -x "$JAVA_HOME/bin/java" ]; thenJAVA="$JAVA_HOME/bin/java"elseJAVA=`which java`fiif [ ! -x "$JAVA" ]; thenecho "Could not find any executable java binary. Please install java in your PATH or set JAVA_HOME"exit 1fi}

start() {
    checkJava
    [ -x $exec ] || exit 5if [ -n "$MAX_LOCKED_MEMORY" -a -z "$ES_HEAP_SIZE" ]; thenecho "MAX_LOCKED_MEMORY is set - ES_HEAP_SIZE must also be set"return 7fiif [ -n "$MAX_OPEN_FILES" ]; thenulimit -n $MAX_OPEN_FILESfiif [ -n "$MAX_LOCKED_MEMORY" ]; thenulimit -l $MAX_LOCKED_MEMORYfiif [ -n "$MAX_MAP_COUNT" -a -f /proc/sys/vm/max_map_count ]; thensysctl -q -w vm.max_map_count=$MAX_MAP_COUNTfiexport ES_GC_LOG_FILE

    # Ensure that the PID_DIR exists (it is cleaned at OS startup time)if [ -n "$PID_DIR" ] && [ ! -e "$PID_DIR" ]; thenmkdir -p "$PID_DIR" && chown "$ES_USER":"$ES_GROUP" "$PID_DIR"fiif [ -n "$pidfile" ] && [ ! -e "$pidfile" ]; thentouch "$pidfile" && chown "$ES_USER":"$ES_GROUP" "$pidfile"ficd $ES_HOMEecho -n $"Starting $prog: "# if not running, start it up here, usually something like "daemon $exec"daemon --user $ES_USER  --pidfile $pidfile $exec -p $pidfile -d

    #daemon --user $ES_USER --pidfile $pidfile $exec -p $pidfile -d -Des.default.path.home=$ES_HOME -Des.default.path.logs=$LOG_DIR -Des.default.path.data=$DATA_DIR -Des.default.path.conf=$CONF_DIR
    retval=$?echo[ $retval -eq 0 ] && touch $lockfilereturn $retval
}

stop() {echo -n $"Stopping $prog: "# stop it here, often "killproc $prog"killproc -p $pidfile -d 86400 $prog
    retval=$?echo[ $retval -eq 0 ] && rm -f $lockfilereturn $retval
}

restart() {
    stop
    start
}

reload() {
    restart
}

force_reload() {
    restart
}

rh_status() {
    # run checks to determine if the service is running or use generic status
    status -p $pidfile $prog
}

rh_status_q() {
    rh_status >/dev/null 2>&1}case "$1" instart)
        rh_status_q && exit 0$1;;
    stop)
        rh_status_q || exit 0$1;;
    restart)
        $1;;
    reload)
        rh_status_q || exit 7$1;;
    force-reload)
        force_reload
        ;;
    status)
        rh_status
        ;;
    condrestart|try-restart)
        rh_status_q || exit 0restart
        ;;*)echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"exit 2esacexit $?

 

# chmod +x /etc/init.d/elasticsearch

# /etc/init.d/elasticsearch start

# /etc/init.d/elasticsearch status

elasticsearch (pid 20895) is running...

# netstat -ntlp |grep 9[2-3]00tcp 0 0 :::9300 :::* LISTEN 20895/java

tcp 0 0 :::9200 :::* LISTEN 20895/java

三、 配置elasticsearch

内存低于2G,需要修改jvm配置

-Xms512m

-Xmx512m

# cat /data/PRG/elasticsearch/config/elasticsearch.yml |grep -v '#'network.host: 0.0.0.0 ###开启监听地址,

action.auto_create_index: .security,.monitoring*,.watches,.triggered_watches,.watcher-history*####以下模块视情况是否开启

xpack.security.enabled: true ####开启用户认证

xpack.monitoring.enabled: truexpack.graph.enabled: truexpack.watcher.enabled: truexpack.security.authc.realms: ####用户认证模式,ldap、file、pki、Active Directory等

file1:

type: fileorder: 0

四、 安装logstash

 

# cd /data/PRG/# tar zxvf /data/elk5.0/logstash-5.0.2.tar.gz

# mv logstash-5.0.2 logstash

# useradd logstash -s /sbin/nologin

# chown logstash. logstash /data/PRG/logstash

添加启动脚本

vim /etc/init.d/logstash

#!/bin/sh# Init script for logstash
# Maintained by Elasticsearch
# Generated by pleaserun.
# Implemented based on LSB Core 3.1:
#   * Sections: 20.2, 20.3#
### BEGIN INIT INFO
# Provides:          logstash
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5# Default-Stop:      0 1 6# Short-Description:
# Description:        Starts Logstash as a daemon.
### END INIT INFO

PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATHif [ `id -u` -ne 0 ]; then
   echo "You need root privileges to run this script"
   exit 1finame=logstash
pidfile="/var/run/$name.pid"LS_USER=logstash
LS_GROUP=logstash
LS_HOME=/var/lib/logstash
LS_HEAP_SIZE="1g"LS_LOG_DIR=/var/log/logstash
LS_LOG_FILE="${LS_LOG_DIR}/$name.log"LS_CONF_DIR=/etc/logstash/conf.d
LS_OPEN_FILES=16384LS_NICE=19KILL_ON_STOP_TIMEOUT=${KILL_ON_STOP_TIMEOUT-0} #default value is zero to this variable but could be updated by user request
LS_OPTS=""[ -r /etc/default/$name ] && . /etc/default/$name
[ -r /etc/sysconfig/$name ] && . /etc/sysconfig/$name

program=/opt/logstash/bin/logstash
args="agent -f ${LS_CONF_DIR} -l ${LS_LOG_FILE} ${LS_OPTS}"quiet() {  "$@" > /dev/null 2>&1
  return $?}

start() {

  LS_JAVA_OPTS="${LS_JAVA_OPTS} -Djava.io.tmpdir=${LS_HOME}"
  HOME=${LS_HOME}
  export PATH HOME LS_HEAP_SIZE LS_JAVA_OPTS LS_USE_GC_LOGGING LS_GC_LOG_FILE

  # chown doesn't grab the suplimental groups when setting the user:group - so we have to do it for it.
  # Boy, I hope we're root here.
  SGROUPS=$(id -Gn "$LS_USER" | tr " " "," | sed 's/,$//'; echo '')  if [ ! -z $SGROUPS ]  thenEXTRA_GROUPS="--groups $SGROUPS"
  fi

  # set ulimit as (root, presumably) first, before we drop privileges
  ulimit -n ${LS_OPEN_FILES}

  # Run the program!  nice -n ${LS_NICE} chroot --userspec $LS_USER:$LS_GROUP $EXTRA_GROUPS / sh -c "    cd $LS_HOME
    ulimit -n ${LS_OPEN_FILES}
    exec \"$program\" $args
  " > "${LS_LOG_DIR}/$name.stdout" 2> "${LS_LOG_DIR}/$name.err" &
  # Generate the pidfile from here. If we instead made the forked process
  # generate it there will be a race condition between the pidfile writing
  # and a process possibly asking for status.  echo $! > $pidfile  echo "$name started."
  return 0}

stop() {
  # Try a few times to kill TERM the program  if status ; thenpid=`cat "$pidfile"`echo "Killing $name (pid $pid) with SIGTERM"kill -TERM $pid
    # Wait for it to exit.for i in 1 2 3 4 5 6 7 8 9 ; do  echo "Waiting $name (pid $pid) to die..."  status || break      sleep 1doneif status ; then  if [ $KILL_ON_STOP_TIMEOUT -eq 1 ] ; thenecho "Timeout reached. Killing $name (pid $pid) with SIGKILL. This may result in data loss."kill -KILL $pidecho "$name killed with SIGKILL."  elseecho "$name stop failed; still running."return 1 # stop timed out and not forced      fielse  echo "$name stopped."fi
  fi}

status() {  if [ -f "$pidfile" ] ; thenpid=`cat "$pidfile"`if kill -0 $pid > /dev/null 2> /dev/null ; then  # process by this pid is running.
      # It may not be our pid, but that's what you get with just pidfiles.  # TODO(sissel): Check if this process seems to be the same as the one we
      # expect. It'd be nice to use flock here, but flock uses fork, not exec,  # so it makes it quite awkward to use in this case.
      return 0else  return 2 # program is dead but pid file existsfi
  elsereturn 3 # program is not running  fi}

reload() {  if status ; thenkill -HUP `cat "$pidfile"`  fi}

force_stop() {  if status ; thenstop
    status && kill -KILL `cat "$pidfile"`  fi}

configtest() {
  # Check if a config file exists  if [ ! "$(ls -A ${LS_CONF_DIR}/* 2> /dev/null)" ]; thenecho "There aren't any configuration files in ${LS_CONF_DIR}"return 1
  fi

  HOME=${LS_HOME}
  export PATH HOME

  test_args="--configtest -f ${LS_CONF_DIR} ${LS_OPTS}"
  $program ${test_args}
  [ $? -eq 0 ] && return 0
  # Program not configured
  return 6}case "$1" in
  start)
    status
    code=$?if [ $code -eq 0 ]; then  echo "$name is already running"else  start
      code=$?fiexit $code
    ;;
  stop) stop ;;
  force-stop) force_stop ;;
  status)
    status
    code=$?if [ $code -eq 0 ] ; then  echo "$name is running"else  echo "$name is not running"fiexit $code
    ;;
  reload) reload ;;
  restart)

    quiet configtest
    RET=$?if [ ${RET} -ne 0 ]; then  echo "Configuration error. Not restarting. Re-run with configtest parameter for details"  exit ${RET}fistop && start
    ;;
  configtest)
    configtest
    exit $?;;  *)echo "Usage: $SCRIPTNAME {start|stop|force-stop|status|reload|restart|configtest}" >&2exit 3
  ;;esacexit $?

 

# chmod +x /etc/init.d/logstash

# /etc/init.d/logstash start

# /etc/init.d/logstash status

logstash is running

# netstat -ntlp|grep 9600tcp 0 0 :::9600 :::* LISTEN 10141/java

五、 配置 logstash

# cat /data/PRG/logstash/config/logstash.yml |grep -v '#'http.host: "0.0.0.0" ###开启监听地址

 

nginx日志收集

 

 

# cat /data/PRG/logstash/conf.d/filter.conf 

input {

beats {

port => 10200}

}

filter {

grok {

match => {

message => "%{IPORHOST:remote_addr} , \[%{HTTPDATE:timestamp}\] , %{IPORHOST:http_host} , \"%{WORD:http_verb} (?:%{PATH:baseurl}\?%{NOTSPACE:params}|%{DATA:raw_http_request})\" , %{NUMBER:http_status_code} , %{NUMBER:bytes_read} , %{QS:referrer} , %{QS:agent} , \"%{IPORHOST:client_ip}, %{IPORHOST:proxy_server}\" , - , - , - , %{IPORHOST:server_ip} , %{BASE10NUM:request_duration}" }

match => {

message => "%{IPORHOST:remote_addr} , \[%{HTTPDATE:timestamp}\] , %{IPORHOST:http_host} , \"%{WORD:http_verb} (?:%{PATH:baseurl}\?%{NOTSPACE:params}|%{DATA:raw_http_request})\" , %{NUMBER:http_status_code} , %{NUMBER:bytes_read} , %{QUOTEDSTRING:referrer} , %{QS:agent} , \"%{IPORHOST:client_ip}, %{IPORHOST:proxy_server}\" , %{IPORHOST}:%{INT} , %{INT} , %{BASE10NUM} , %{IPORHOST} , %{BASE10NUM:request_duration}" }

}

}

output {

elasticsearch {

hosts => ["192.168.62.200:9200"]

index => "operation-%{+YYYY.MM.dd}"document_type => "nginx2"user => 'admin' #### elasticsearch的用户名,用X-PACK插件创建

password => 'kbsonlong' #### elasticsearch的用户名

}

stdout { codec => rubydebug }

}

 

 

六、 安装kibana

 

# cd /data/PRG/# tar zxvf /data/elk5.0/kibana-5.0.2-linux-x86_64.tar.gz

# mv kibana-5.0.2-linux-x86_64 kibana

# useradd kibana –s /sbin/nologin

# chown kibana. kibana /data/PRG/kibana

添加启动脚本

# vim /etc/init.d/kibana

#!/bin/sh# Init script for kibana
# Maintained by 
# Generated by pleaserun.
# Implemented based on LSB Core 3.1:
#   * Sections: 20.2, 20.3#
### BEGIN INIT INFO
# Provides:          kibana
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5# Default-Stop:      0 1 6# Short-Description: 
# Description:       Kibana
### END INIT INFO

PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATH

KIBANA_HOME=/data/PRG/kibana
name=kibana
program=$KIBANA_HOME/bin/kibana
args=''pidfile="$KIBANA_HOME/logs/$name.pid"LOG_HOME="$KIBANA_HOME/logs"[ -r /etc/default/$name ] && . /etc/default/$name
[ -r /etc/sysconfig/$name ] && . /etc/sysconfig/$name

[ -z "$nice" ] && nice=0trace() {
  logger -t "/etc/init.d/kibana" "$@"}

emit() {
  trace "$@"
  echo "$@"}

start() {

  # Ensure the log directory is setup correctly.
  [ ! -d "$LOG_HOME" ] && mkdir "$LOG_HOME"
  chmod 755 "$LOG_HOME"


  # Setup any environmental stuff beforehand
  

  # Run the program!
  
  #chroot --userspec "$user":"$group" "$chroot" sh -c "    
  $program $args >> $LOG_HOME/kibana.stdout 2>> $LOG_HOME/kibana.stderr &

  # Generate the pidfile from here. If we instead made the forked process
  # generate it there will be a race condition between the pidfile writing
  # and a process possibly asking for status.  echo $! > $pidfile

  emit "$name started"
  return 0}

stop() {
  # Try a few times to kill TERM the program  if status ; thenpid=$(cat "$pidfile")echo "Killing $name (pid $pid) with SIGTERM"ps -ef |grep $pid |grep -v 'grep' |awk '{print $2}' | xargs kill -9# Wait for it to exit.for i in 1 2 3 4 5 ; do  trace "Waiting $name (pid $pid) to die..."  status || break      sleep 1doneif status ; then  if [ "$KILL_ON_STOP_TIMEOUT" -eq 1 ] ; thentrace "Timeout reached. Killing $name (pid $pid) with SIGKILL.  This may result in data loss."kill -KILL $pid
        emit "$name killed with SIGKILL."  elseemit "$name stop failed; still running."  fielse  emit "$name stopped."fi
  fi}

status() {  if [ -f "$pidfile" ] ; thenpid=$(cat "$pidfile")if ps -p $pid > /dev/null 2> /dev/null ; then  # process by this pid is running.
      # It may not be our pid, but that's what you get with just pidfiles.  # TODO(sissel): Check if this process seems to be the same as the one we
      # expect. It'd be nice to use flock here, but flock uses fork, not exec,  # so it makes it quite awkward to use in this case.
      return 0else  return 2 # program is dead but pid file existsfi
  elsereturn 3 # program is not running  fi}case "$1" in
  force-start|start|stop|status|restart)
    trace "Attempting '$1' on kibana";;esaccase "$1" in
  force-start)
    PRESTART=no
    exec "$0" start
    ;;
  start)
    status
    code=$?if [ $code -eq 0 ]; then  emit "$name is already running"  exit $codeelse  start
      exit $?fi;;
  stop) stop ;;
  status)
    status
    code=$?if [ $code -eq 0 ] ; then  emit "$name is running"else  emit "$name is not running"fiexit $code
    ;;
  restart)
    
    stop && start
    ;;  *)echo "Usage: $SCRIPTNAME {start|force-start|stop|force-start|force-stop|status|restart}" >&2exit 3
  ;;esacexit $?
# chmod +x /etc/init.d/kibana

# /etc/init.d/kibana start 

# /etc/init.d/kibana status

# netstat -ntlp |grep 5601tcp 0 0 0.0.0.0:5601 0.0.0.0:* LISTEN 13052/node

七、 配置kibana

# cat /data/PRG/kibana/config/kibana.yml |grep -v '#'server.host: "0.0.0.0"####以下模块视情况是否开启

xpack.security.enabled: truexpack.monitoring.enabled: truexpack.graph.enabled: truexpack.reporting.enabled: true

八、 安装x-pack插件

# /data/PRG/kibana/bin/kibana-plugin install file:///root/x-pack-5.0.0.zip# /data/PRG/elasticsearch/bin/elasticsearch-plugin install file:///root/x-pack-5.0.0.zip

离线安装x-pack要修改用户脚本,默认创建用户配置文件在/etc/elasticsearch/x-pack目录

在创建用户的时候提示/etc/elasticsearch/x-pack/users…tmp不存在,直接创建目录或者修改/data/PRG/elasticsearch/bin/x-pack/users脚本

# mkdir /etc/elasticsearch/x-pack/# chown elasticsearch. elasticsearch /etc/elasticsearch/x-pack/ -R

九、 x-pack管理用户

1、 添加用户

# cd /data/PRG/elasticsearch

# bin/x-pack/users useradd admin -p kbsonlong -r superuser

2、 查看用户

# /data/PRG/elasticsearch/bin/x-pack/users list

admin : superuser

test : - ###创建用户时没有添加-r参数,所以没有用户角色

3、 测试用户登录

# curl http://localhost:9200/_xpack/ --user admin:kbsonlong{"build":{"hash":"7763f8e","date":"2016-10-26T04:51:59.202Z"},"license":{"uid":"06a82587-66ac-4d4a-90c4-857d9ca7f3bc","type":"trial","mode":"trial","status":"active","expiry_date_in_millis":1483753731066},"features":{"graph":{"description":"Graph Data Exploration for the Elastic Stack","available":true,"enabled":true},"monitoring":{"description":"Monitoring for the Elastic Stack","available":true,"enabled":true},"security":{"description":"Security for the Elastic Stack","available":true,"enabled":true},"watcher":{"description":"Alerting, Notification and Automation for the Elastic Stack","available":true,"enabled":true}},"tagline":"You know, for X"}

4、 删除用户

# /data/PRG/elasticsearch/bin/x-pack/users userdel test

# /data/PRG/elasticsearch/bin/x-pack/users list

admin : superuser

十、 安装filebeat

# cd /data/PRG

# tar zxvf / data/elk5.0/filebeat-5.0.0-linux-x86_64.tar.gz

# mv filebeat-5.0.0-linux-x86_64 filebeat

 

配置启动脚本

# vim /etc/init.d/filebeat

 

#!/bin/bash
#
# filebeat          filebeat shipper
#
# chkconfig: 2345 98 02#

### BEGIN INIT INFO
# Provides:          filebeat
# Required-Start:    $local_fs $network $syslog
# Required-Stop:     $local_fs $network $syslog
# Default-Start:     2 3 4 5# Default-Stop:      0 1 6# Short-Description: Sends log files to Logstash or directly to Elasticsearch.
# Description:       filebeat is a shipper part of the Elastic Beats 
#                     family. Please see: https://www.elastic.co/products/beats### END INIT INFO



PATH=/usr/bin:/sbin:/bin:/usr/sbin
export PATH

[ -f /etc/sysconfig/filebeat ] && . /etc/sysconfig/filebeat
pidfile=${PIDFILE-/data/PRG/filebeat/filebeat.pid}
agent=${PB_AGENT-/data/PRG/filebeat/filebeat}
args="-c /data/PRG/filebeat/filebeat.yml"test_args="-e -configtest"wrapper="filebeat-god"wrapperopts="-r / -n -p $pidfile"RETVAL=0# Source function library.
. /etc/rc.d/init.d/functions

# Determine if we can use the -p option to daemon, killproc, and status.
# RHEL < 5 can't.if status | grep -q -- '-p' 2>/dev/null; thendaemonopts="--pidfile $pidfile"pidopts="-p $pidfile"fitest() {
    $agent $args $test_args
}

start() {echo -n $"Starting filebeat: "testif [ $? -ne 0 ]; thenechoexit 1fidaemon $daemonopts $wrapper $wrapperopts -- $agent $args
    RETVAL=$?echoreturn $RETVAL
}

stop() {echo -n $"Stopping filebeat: "killproc $pidopts $wrapper
    RETVAL=$?echo[ $RETVAL = 0 ] && rm -f ${pidfile}
}

restart() {
    testif [ $? -ne 0 ]; thenreturn 1fistop
    start
}

rh_status() {
    status $pidopts $wrapper
    RETVAL=$?return $RETVAL
}

rh_status_q() {
    rh_status >/dev/null 2>&1}case "$1" instart)
        start
    ;;
    stop)
        stop
    ;;
    restart)
        restart
    ;;
    condrestart|try-restart)
        rh_status_q || exit 0restart
    ;;
    status)
        rh_status
    ;;*)echo $"Usage: $0 {start|stop|status|restart|condrestart}"exit 1esacexit $RETVAL

 

# cat filebeat/filebeat.yml |grep -v '#'

filebeat.prospectors:

- input_type: log

paths:

- /tmp/nginx.log

output.logstash:

enabled: true

hosts: ["localhost:10200"]

启动filebeat

# /etc/init.d/filebeat5 start

Starting filebeat: 2016/12/08 07:18:37.177631 beat.go:264: INFO Home path: [/data/PRG/filebeat] Config path: [/data/PRG/filebeat] Data path: [/data/PRG/filebeat/data] Logs path: [/data/PRG/filebeat/logs]2016/12/08 07:18:37.177681 beat.go:174: INFO Setup Beat: filebeat; Version: 5.0.02016/12/08 07:18:37.177760 logstash.go:90: INFO Max Retries set to: 32016/12/08 07:18:37.177828 outputs.go:106: INFO Activated logstash as output plugin.2016/12/08 07:18:37.177912 publish.go:291: INFO Publisher name: operation2016/12/08 07:18:37.178158 async.go:63: INFO Flush Interval set to: 1s2016/12/08 07:18:37.178170 async.go:64: INFO Max Bulk Size set to: 2048Config OK

[ OK ]

# /etc/init.d/filebeat5 status

filebeat-god (pid 7365) is running...

# ps -ef |grep filebeat

root 7405 1 0 15:18 pts/1 00:00:00 filebeat-god -r / -n -p /data/PRG/filebeat/filebeat.pid -- /data/PRG/filebeat/filebeat -c /data/PRG/filebeat/filebeat.yml

root 7406 7405 0 15:18 pts/1 00:00:00 /data/PRG/filebeat/filebeat -c /data/PRG/filebeat/filebeat.yml

# netstat -ntlp | egrep '9200|9300|5601|9600|10200'tcp 0 0 0.0.0.0:5601 0.0.0.0:* LISTEN 14339/node

tcp 0 0 :::9300 :::* LISTEN 14205/java

tcp 0 0 :::10200 :::* LISTEN 14309/java

tcp 0 0 ::ffff:127.0.0.1:9600 :::* LISTEN 14309/java

tcp 0 0 :::9200 :::* LISTEN 14205/java

本文永久更新链接地址http://www.linuxidc.com/Linux/2017-09/147142.htm

linux
相关资讯       ELK 
本文评论   查看全部评论 (0)
表情: 表情 姓名: 字数

       

评论声明
  • 尊重网上道德,遵守中华人民共和国的各项有关法律法规
  • 承担一切因您的行为而直接或间接导致的民事或刑事法律责任
  • 本站管理人员有权保留或删除其管辖留言中的任意内容
  • 本站有权在网站内转载或引用您的评论
  • 参与本评论即表明您已经阅读并接受上述条款