手机版
你好,游客 登录 注册
背景:
阅读新闻

Innodb: 自动开启打印show engine status到err日志

[日期:2019-04-06] 来源:itpub.net  作者:高鹏 [字体: ]

一、问题描述

为什么我的err日志里面有大量的show engine innodb status的记录,我自己并没有开启innodb_status_output参数。

二、问题分析

通过查看日志,发现如下输出:
2019-03-21T17:00:02.375231Z 1230497 [Warning] InnoDB: Difficult to find free blocks in the buffer pool (338 search iterations)! 0 failed attempts to flush a page! Consider increasing the buffer pool size. It is also possible
that in your Unix version fsync is very slow, or completely frozen inside the OS kernel. Then upgrading to a
newer version of your operating system may help. Look at the number of fsyncs in diagnostic info below.
Pending flushes (fsync) log: 0; buffer pool: 0. 1446962050 OS file reads, 545881917 OS file writes,
376257282 OS fsyncs. Starting InnoDB Monitor to print further diagnostics to the standard output.

日志也写得很清楚。应该是free block不够了Innodb自动开启了。但是我们需要源码验证一下。

三、源码验证

在源码的buf_LRU_handle_lack_of_free_blocks函数中我们看到如下:
if ((current_ms > started_ms + 2000)
        && (current_ms > last_printout_ms + 2000)
        && srv_buf_pool_old_size == srv_buf_pool_size) {
        ib::warn() << "Difficult to find free blocks in the buffer pool"
            " (" << n_iterations << " search iterations)! "
              << flush_failures << " failed attempts to"
            " flush a page! Consider increasing the buffer pool"
            " size. It is also possible that in your Unix version"
            " fsync is very slow, or completely frozen inside"
            " the OS kernel. Then upgrading to a newer version"
            " of your operating system may help. Look at the"
            " number of fsyncs in diagnostic info below."
            " Pending flushes (fsync) log: "
              << fil_n_pending_log_flushes
              << "; buffer pool: "
              << fil_n_pending_tablespace_flushes
              << ". " << os_n_file_reads << " OS file reads, "
              << os_n_file_writes << " OS file writes, "
              << os_n_fsyncs
              << " OS fsyncs. Starting InnoDB Monitor to print"
            " further diagnostics to the standard output.";
        last_printout_ms = current_ms;
        *mon_value_was = srv_print_innodb_monitor;
        *started_monitor = true;
        srv_print_innodb_monitor = true;
        os_event_set(srv_monitor_event);


这里不仅打印出了日志同时设置了参数srv_print_innodb_monitor = true; 并且开始os_event_set(srv_monitor_event);开启了monitor打印线程。那我们看看srv_print_innodb_monitor 对应什么参数呢。如下:
static MYSQL_SYSVAR_BOOL(status_output, srv_print_innodb_monitor,
  PLUGIN_VAR_OPCMDARG, "Enable InnoDB monitor output to the error log.",  NULL, innodb_status_output_update, FALSE);

实际上就是innodb_status_output被自动开了。当然如果查看调用可以在上层函数buf_LRU_get_free_block中查看到调用,实际上就是在free list找不到空闲的block的时候会做输出。buf_LRU_get_free_block还包含了一个块的分配流程大约如下,可自行参考:

  •  If there is a block in the free list, take it .如果这里找不到就会自动开启innodb_status_output
  •  If no block was in the free list, search from the end of the LRU list and try to free a block there.
  •  No free block was found: try to flush the LRU list.

Linux公社的RSS地址https://www.linuxidc.com/rssFeed.aspx

本文永久更新链接地址https://www.linuxidc.com/Linux/2019-04/157971.htm

linux
相关资讯       show engine status 
本文评论   查看全部评论 (0)
表情: 表情 姓名: 字数

       

评论声明
  • 尊重网上道德,遵守中华人民共和国的各项有关法律法规
  • 承担一切因您的行为而直接或间接导致的民事或刑事法律责任
  • 本站管理人员有权保留或删除其管辖留言中的任意内容
  • 本站有权在网站内转载或引用您的评论
  • 参与本评论即表明您已经阅读并接受上述条款